Abstract:This work presents the development of novel IBC‐SHJ solar cells with a MoOx blanket layer aiming to simultaneously enable a simplified device processing and a high shunt resistance in the device. The fabricated solar cells exhibit efficiencies up to 21.14% with high shunt resistances above 150 kΩcm2. The fabrication process of interdigitated‐back‐contacted silicon heterojunction (IBC‐SHJ) solar cells has been significantly simplified with the development of the so‐called tunnel‐IBC architecture. This architecture utilizes a highly conductive (p)‐type nanocrystalline silicon (nc‐Si:H) layer deposited over the full substrate area comprising pre‐patterned (n)‐type nc‐Si:H fingers. In this context, the (p)‐type nc‐Si:H layer is referred to as blanket layer. As both electrodes are connected to the same blanket layer, the high lateral conductivity of (p)nc‐Si:H layer can potentially lead to relatively low shunt resistance in the device, thus limiting the performance of such solar cells. To overcome such limitation, we introduce a thin (<2 nm) full‐area molybdenum oxide (MoOx) layer as an alternative to the (p)nc‐Si:H blanket layer. We demonstrate that the use of such a thin MoOx minimizes the shunting losses thanks to its low lateral conductivity while preserving the simplified fabrication process. In this process, a novel (n)‐type nc‐Si:H/MoOx electron collection contact stack is implemented within the proposed solar cell architecture. We assess its transport mechanisms via electrical simulations showing that electron transport, unlike in the case of tunnel‐IBC, occurs in the conduction band fully. Moreover, the proposed contact stack is evaluated in terms of contact resistivity and integrated into a proof‐of‐concept front/back‐contacted (FBC) SHJ solar cells. Contact resistivity as low as 100 mΩcm2 is achieved, and fabricated FBC‐SHJ solar cells obtain a fill factor above 81.5% and open‐circuit voltage above 705 mV. Lastly, the IBC‐SHJ solar cells featuring the MoOx blanket layer are fabricated, exhibiting efficiencies up to 21.14% with high shunt resistances above 150 kΩcm2. Further optimizations in terms of layer properties and fabrication process are proposed to improve device performance and realize the efficiency potential of our novel IBC‐SHJ solar cell architecture.

Single‐Side Heterojunction Solar Cell with Microcrystalline Silicon Oxide Emitter and Diffused Back Surface Field

Highly Efficient Silicon Heterojunction Solar Cells with ZnO:Al Transparent Electrode and Transition Metal Doped Indium Oxide Interfacial Layer

Beyond 25% efficient crystalline silicon heterojunction solar cells with hydrogenated amorphous silicon oxide stacked passivation layers for rear emitter

Silicon heterojunction solar cells with up to 26.81% efficiency achieved by electrically optimized nanocrystalline-silicon hole contact layers

Bifacial silicon heterojunction solar cells using transparent‐conductive‐oxide‐ and dopant‐free electron‐selective contacts

Simulation of a high-efficiency silicon-based heterojunction solar cell

Balance of efficiency and stability of silicon heterojunction solar cells

25.11% efficiency silicon heterojunction solar cell with low deposition rate intrinsic amorphous silicon buffer layers

Improving the performance of high-efficiency silicon heterojunction solar cells through low-temperature deposition of an i-a-Si:H anti-epitaxial buffer layer

Simulation of p-type c-Si solar cells with metal oxides as carrier-selective contacts

Crystalline Silicon Heterojunction Solar Cells with Metal Oxide Window Layers

Simulation and experimental study of a novel bifacial structure of silicon heterojunction solar cell for high efficiency and low cost

The microstructure of underdense hydrogenated amorphous silicon and its application to silicon heterojunction solar cells

Toward Efficiency Limits of Crystalline Silicon Solar Cells: Recent Progress in High‐Efficiency Silicon Heterojunction Solar Cells

Simulation of Silicon Heterojunction Solar Cells for High Efficiency with Lithium Fluoride Electron Carrier Selective Layer

N-type nc-SiOx:H film enables efficient and stable silicon heterojunction solar cells in sodium environment

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Interdigitated‐back‐contacted silicon heterojunction solar cells featuring novel MoOx‐based contact stacks

Interdigitated back contact silicon heterojunction solar cell and the effect of front surface passivation

Large‐area MoOx/c‐Si heterojunction solar cells with a ICO/Ag back reflector

Silicon heterojunction-based tandem solar cells: past, status, and future prospects