Abstract:Wireless charging schemes aim to counter some drawbacks of electric vehicles’ wired charging, such as the fact that it does not encourage mobility, leads to safety issues regarding high voltage cables, power adapters high cost, and has more battery waste by companies. In this paper, a comparative study of wireless power transfer multiple coil geometries is performed to analyze the efficiency, coupling coefficient, mutual inductance, and magnetic flux density production for each geometry. Results show that coil geometry, current excitation, and shielding techniques within the Wireless Electric Vehicle Charging (WEVC) system substantially influence magnetic flux leakage. In addition, the paper proposes an analytical framework for a WEVC scheme via electromagnetic resonance coupling. Safety considerations of the WEVC system, including the effects on humans, are investigated in several scenarios based on the relative location of the human while EV charging is conducted as the leading paper’s goal. The exposure measurements are performed across various radial distances from the coils using 3-D FEA ANSYS Maxwell Software (American technology company, Pennsylvania, United States). The analysis shows that WEVC systems can achieve high power transfer, resulting in increased magnetic flux leakage around the coils. The safe distance for humans and animals during the charging sequence is attained from research results. For instance, in the 120 mm spiral coil, 120 mm square coil, and 600 mm spiral coil operating at 1 A, excitation, the SAR levels are under the threshold of 700 mm away from the coils. For the 600 mm spiral coil excited at 8 A, the SAR levels fall under the threshold at 900 mm away from the coils. When shielding is utilized, the safe distance is improved by up to 350 mm. Considering the regulations of the Non-Ionizing Radiation Protection (ICNIRP) standards, 600 mm is a safe distance away from the coils, and, vertically, anywhere past 300 mm is safe for humans.

Regulate drain‐shield relative positioning and contact for mitigating radiated emission from USB cables

Reducing Extended Magnetic Stray Field in Wireless Charging Systems of Electric Vehicles

Magnetic Stray Field Attenuation in High-Power WPT Systems Based on Modular Concept

Wireless EV Charging System Without Air-Gap and Misalignment

Numerical Characterization And Evaluation Of Esd Induced Field And Coupling On Interconnection Cable

A Study on the Shielding for Wireless Charging Systems of Electric Vehicles

A Case Study of Problems in JEDEC HBM ESD Test Standard

Investigation of Problems in JEDEC HBM ESD Test Standard

Investigation on Bi-directional SCR ESD Protection Devices in a 0.18 μm RF CMOS Process

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

Reservoir Effect and the Role of Low Current Density Regions on Electromigration Lifetimes in Copper Interconnects

ESD Circuits Design for High-Speed Analog CMOS Integrated Circuits

On the ESD Protection and Non-Fatal ESD Strike on Nano CMOS Devices

Effect of metal routing on the ESD robustness of dual-direction silicon controlled rectifier

Simulation Analysis of Grounding Characteristics of Cable Based on ATP-EMTP

State Influence of Adjacent Conductors Distributed Around Tested Channel in High-Speed Connector on Electromagnetic Measurement

Electromagnetic Characteristics of Bonding Wires in Advanced Electronic Devices Packaging

Effects of Grounded-Lid Apertures for Package-Level Electromagnetic Interference (EMI) Shielding

Human Exposure Influence Analysis for Wireless Electric Vehicle Battery Charging

Study on the safety assessment and protection design of human exposure to low-frequency magnetic fields in electric vehicles.

A DESIGN FOR SELF-RECOVERING FROM ABNORMAL USB COMMUNICATION