Abstract:Fracture toughness of CFRP laminates with different central interfaces was calculated by considering the curved crack front shape. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. The extensive use of multidirectional composite laminates requires to understand the delamination behavior at interfaces between plies with different fiber orientations. In this study, double cantilever beam testing was performed to investigate the mode I interlaminar fracture of carbon fiber reinforced polymer laminates with different central interfaces (0//0, 0//+45 and +45//−45). X‐ray microtomography revealed the curved crack front shape that was incorporated to calculate fracture toughness. The fracture toughness varies with the crack length in a typical delamination resistance curve, which can be quantified by an empirical equation. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate, compared to constant toughness. It was found that the delamination mechanism is independent of central interfaces. However, compared to unidirectional laminates, multidirectional laminates are less resistant to crack initiation, but more resistant to propagation with higher toughness and shorter fiber bridging zone. Highlights Mode I interlaminar fracture of CFRP laminates with different central interfaces was investigated experimentally and numerically. Curved crack front shape was incorporated to calculate fracture toughness. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. Multidirectional laminates are less resistant to crack initiation but more resistant to propagation with higher toughness and shorter fiber bridging zone.

Characterization of mode II delamination behaviour of poplar plywood and LVL

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Mode Ii Fracture Testing Method for Highly Orthotropic Materials Like Wood

Interlaminar Fracture Toughness Evaluation in Glass/Epoxy Composites Using Acoustic Emission and Finite Element Methods

Effect of crack size, thickness and span on the transverse mode I fracture characteristics of laminated flattened-bamboo lumber

Numerical investigation of two-dimensional Mode-II delamination in composite laminates

Experimental characterization and numerical modelling of the translaminar fracture of woven-ply hybrid fibers reinforced thermoplastic laminates

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates

Mode I and II Interlaminar Fracture in Laminated Composites: A Size Effect Study

Crack growth study of wood and transparent wood-polymer composite laminates by in-situ testing in weak TR-direction

On the high fracture toughness of wood and polymer-filled wood composites – Crack deflection analysis for materials design

Investigation of Mode I and II Interlaminar Fracture Toughness of Nylon/Glass Fiber Laminates with Various Layup Orientations

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

Study on flexural behaviour of a novel wood composite beam

Mode II Interlaminar Fracture Toughness of Flax/Glass/Epoxy Hybrid Composite Materials: An Experimental and Numerical Study

Experimental and Numerical Investigation of the Fracture Behavior of Extruded Wood–Plastic Composites under Bending

Mode II delamination of a unidirectional glass fiber/epoxy composite

The effect of crack orientation on the mode I fracture resistance of pinewood

Evaluation of a climbing drum laminate peel test to determine the interlaminar mode I fracture toughness of thin CFRP laminates—Comparison with the standard mode I DCB test and a mandrel laminate peel test proposed by ESIS TC4