Abstract:Reliable non-destructive testing (NDT) ultrasound systems for timber composite structures require quantitative understanding of the propagation of ultrasound beams in wood. A finite-difference time-domain (FDTD) model is described, which incorporates local anisotropy variations of stiffness, damping and density in timber elements. The propagation of pulsed air-coupled ultrasound (ACU) beams in normal and slanted incidence configurations is reproduced by direct definition of material properties (gas, solid) at each model pixel. First, the model was quantitatively validated against analytical derivations. Time-varying wavefronts in unbounded timber with curved growth rings were accurately reproduced, as well as the acoustic properties (velocity, attenuation, beam skewing) of ACU beams transmitted through timber lamellas. An experimental sound field imaging (SFI) setup was implemented at NDT frequencies (120 kHz), which for specific beam incidence positions allows spatially resolved ACU field characterization at the receiver side. The good agreement of experimental and modeled beam shifts across timber laminates allowed extrapolation of the inner propagation paths. The modeling base is an orthotropic stiffness dataset for the desired wood species. In cross-grain planes, beam skewing leads to position-dependent wave paths. They are well-described in terms of the growth ring curvature, which is obtained by visual observation of the laminate. Extraordinary refraction phenomena were observed, which lead to well-collimated quasi-shear wave coupling at grazing beam incidence angles. The anisotropic damping in cross-grain planes is satisfactorily explained in terms of the known anisotropic stiffness dataset and a constant loss tangent. The incorporation of high-resolution density maps (X-ray computed tomography) provided insight into ultrasound scattering effects in the layered growth ring structure. Finally, the combined potential of the FDTD model and the SFI setup for material property and defect inversion in anisotropic materials was demonstrated. A portable SFI demonstrator was implemented with a multi-sensor MEMs receiver array that captures and compensates for variable wave propagation paths in glued laminated timber, and improves the imaging of lamination defects.

Crack growth study of wood and transparent wood-polymer composite laminates by in-situ testing in weak TR-direction

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

On the high fracture toughness of wood and polymer-filled wood composites – Crack deflection analysis for materials design

Dynamic crack propagation in wood fibre composites analysed by high speed photography and a dynamic phase field model

Characterization of mode II delamination behaviour of poplar plywood and LVL

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Experimental and Numerical Investigation of the Fracture Behavior of Extruded Wood–Plastic Composites under Bending

A strong multilayered transparent wood with natural wood color and texture

Controlled interlaminar crack initiation in thin notched laminated thermoplastic composites under impact loading: A first step towards unitary layer recovery

Intralaminar crack propagation of glass fiber reinforced composite laminate

Analytical modeling, finite-difference simulation and experimental validation of air-coupled ultrasound beam refraction and damping through timber laminates, with application to non-destructive testing

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

Investigation on the char crack growth of densified wood

Transparent Wood Biocomposites by Fast UV-Curing for Reduced Light-Scattering through Wood/Thiol–ene Interface Design

Progressive damage analysis of green composite laminates subjected to in-plane crashworthiness

Understanding the mechanical strength and dynamic structural changes of wood-based products using X-ray computed tomography

Study on intralaminar crack propagation mechanisms in single- and multi-layer 2D woven composite laminate

Experimental investigation of glued-laminated timber beams with Vectran-FRP reinforcement

Effect of Wood Species on Lignin-Retaining High-Transmittance Transparent Wood Biocomposites

Experimental study on the mode Ι interlaminar properties of self-healable vitrimeric CFRP with various interfaces

Experimental characterization and numerical modelling of the translaminar fracture of woven-ply hybrid fibers reinforced thermoplastic laminates