Interlaminar Fracture Toughness Evaluation in Glass/Epoxy Composites Using Acoustic Emission and Finite Element Methods

Milad Saeedifar,Mohamad Fotouhi,Mehdi Ahmadi Najafabadi,Hossein Hosseini Toudeshky

DOI: https://doi.org/10.1007/s11665-014-1291-2

IF: 2.3

2014-11-07

Journal of Materials Engineering and Performance

Abstract:Delamination is one of the most common modes of failure in laminated composites and it leads to the loss of structural strength and stiffness. In this paper, mode I, mode II, and mixed of these pure modes were investigated using mechanical data, Finite Element Method (FEM) and Acoustic Emission (AE) signals. Experimental data were obtained from in situ monitoring of glass/epoxy laminated composites with different lay-ups when subjected to different modes of failure. The main objective was to investigate the behavior of delamination propagation and to evaluate the critical value of the strain energy which is required for onset of the delamination (GC). For the identification of interlaminar fracture toughness of the specimens, four methods were used: (a) ASTM standard methods, (b) FEM analysis, (c) AE method, and (d) sentry function method which is a function of mechanical and AE behaviors of the specimens. The results showed that the GC values obtained by the sentry function method and FEM analysis were in a close agreement with the results of nonlinearity methods which is recommended in the ASTM standards. It was also found that the specimens under different loading conditions and various lay-up have different GC values. These differences are related to different stress components distribution in the specimens which induce various damage mechanisms. Accordingly, stress components distribution obtained from FEM analyses were in agreement with SEM observations of the damaged surfaces of the specimens.

materials science, multidisciplinary

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the challenges in the evaluation of inter - laminar fracture toughness of glass/epoxy composite materials, especially for the delamination behavior in Mode I, Mode II and the mixed cases of these two modes. The main objective of the research is to explore the behavior of delamination propagation through mechanical data, the finite element method (FEM) and acoustic emission (AE) signals, and to evaluate the critical strain - energy release rate ($G_C$) required to initiate delamination. Specifically, the paper aims to:

1. **Evaluate the critical strain energy of delamination under different loading conditions**: Through experimental and numerical simulation methods, study the delamination behavior and its critical strain - energy release rate of glass/epoxy composite specimens with different laminate structures in Mode I, Mode II and mixed modes.

2. **Develop new evaluation methods**: In addition to using ASTM standard methods, methods based on finite element analysis, acoustic emission technology and sentinel functions are also introduced to evaluate the critical strain - energy release rate of delamination, in order to improve the accuracy and reliability of the evaluation.

3. **Compare the results of different methods**: Compare the critical strain - energy release rates obtained by different methods (such as ASTM standard methods, finite element analysis, acoustic emission technology and sentinel function methods) to verify the effectiveness and accuracy of the new methods.

Through these studies, the paper hopes to provide more reliable data support for composite structure design, especially in evaluating the sensitivity and durability of materials to delamination damage.