Abstract:Fracture toughness of CFRP laminates with different central interfaces was calculated by considering the curved crack front shape. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. The extensive use of multidirectional composite laminates requires to understand the delamination behavior at interfaces between plies with different fiber orientations. In this study, double cantilever beam testing was performed to investigate the mode I interlaminar fracture of carbon fiber reinforced polymer laminates with different central interfaces (0//0, 0//+45 and +45//−45). X‐ray microtomography revealed the curved crack front shape that was incorporated to calculate fracture toughness. The fracture toughness varies with the crack length in a typical delamination resistance curve, which can be quantified by an empirical equation. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate, compared to constant toughness. It was found that the delamination mechanism is independent of central interfaces. However, compared to unidirectional laminates, multidirectional laminates are less resistant to crack initiation, but more resistant to propagation with higher toughness and shorter fiber bridging zone. Highlights Mode I interlaminar fracture of CFRP laminates with different central interfaces was investigated experimentally and numerically. Curved crack front shape was incorporated to calculate fracture toughness. Incorporation of variable fracture toughness into a cohesive zone model can better predict the delamination fracture of the laminate. Multidirectional laminates are less resistant to crack initiation but more resistant to propagation with higher toughness and shorter fiber bridging zone.

Effect of fiber orientation of adjacent plies on the mode I delamination fracture of carbon fiber reinforced polymer multidirectional laminates

Investigation of the Mode-I Delamination Behavior of Double-Double Laminate Carbon Fiber Reinforced Composite

An Interface-Dependent Model of Plateau Fracture Toughness in Multidirectional CFRP Laminates under Mode I Loading

Study on Mode-I Fracture Toughness of Composite Laminates with Curved Plies Applied by Automated Fiber Placement

A semi-analytical model for the mode II fracture toughness of multidirectional composite laminates

Mode II Fracture Toughness Related to Ply Angle for Composite Delamination Analysis

Decomposing the coupling damage in mode I multidirectional delamination

Experimental Study on Effect of Fiber Angel Orientation and Mixed-Mode Ratio on Fracture Toughness of Fiber Reinforced Laminate

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

Bridging effect on mode I fatigue delamination behavior in composite laminates

Effect of interface angle on mode I delamination damage behavior of multidirectional fully isotropic laminates with the same global stiffness

The Role of Ply Angle in Interlaminar Delamination Properties of CFRP Laminates

Fracture toughness and fiber bridging mechanism for mode-I interlaminar failure of spread-tow woven composites

Delamination in Carbon Fiber Epoxy DCB Laminates with Different Stacking Sequences: R-curve Behavior and Bridging Traction-Separation Relation

Experimental Study on Delamination of Composite Laminates with 0°/45° Interface under Mode I, Mode II and Mixed-mode I/II Loading

A comprehensive experimental investigation of the rate-dependent interlaminar delamination behaviour of CFRP composites

R-curve Behaviour of the Mixed-Mode I/II Delamination in Carbon/epoxy Laminates with Unidirectional and Multidirectional Interfaces

Mode I Interlaminar Fracture of Composite Laminates Incorporating with Ultrathin Fibrous Sheets

Angle-ply orientation-dependent failure behaviors of carbon fiber reinforced polymer laminates

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Delamination Propagation Criterion Including the Effect of Fiber Bridging for Mixed-Mode I/II Delamination in CFRP Multidirectional Laminates