Abstract:We have thoroughly clarified the mesoscopic nature of serration behavior in a high-Mn austenitic steel in connection with its characteristic localized deformation. A typical high-Mn steel, Fe-22Mn-0.6C (wt. %), with a face centered cubic (FCC) single-phase structure was used in the present study. After 4 cycles of repeated cold-rolling and annealing process, a specimen with a fully recrystallized microstructure having a mean grain size of 2.0 μm was obtained. The specimen was tensile tested at room temperature at an initial strain rate of 8.3 ✗ 10−4 s−1, during which the digital image correlation (DIC) technique was applied for analyzing local strain and strain-rate distributions in the specimen. Obtained results indicated that a unique strain localization behavior characterized by the formation, propagation and annihilation of deformation localized bands, so-called Portevin–Le Chatelier (PLC) bands, determined the global mechanical response appearing as serration on the stress-strain curve. In addition, the in-situ synchrotron XRD diffraction during the tensile test was utilized to understand what was happening in the material with respect to the PLC banding. Lattice strain of (200) plane nearly perpendicular to the tensile direction dropped when every PLC band passed through the beam position, which indicated a stress relaxation occurred inside the PLC band. At the same time, the dislocation density increased drastically when the PLC band passed the beam position, which described that the material was plastically deformed and work-hardened mostly within the PLC band. All the results obtained consistently explained the serration behavior in a mesoscopic scale. The serration behavior on the stress-strain curve totally corresponded to the formation, propagation and annihilation of the PLC band in the 22Mn-0.6C steel, and the localized deformation, i.e., the PLC banding, governed the characteristic strain hardening of the material.

Exploring unusual Lüders deformation in ultrafine-grained high-Mn austenitic steel

Multi-scale Deformation Behavior Investigation of 18cr–8ni Austenitic Steel Subjected to Low-Cycle Fatigue Loading

Hierarchical Deformation Heterogeneity during Lüders Band Propagation in an Fe-5Mn-0.1C Medium Mn Steel Clarified through in situ Scanning Electron Microscopy

Unusual step-like stress flow behavior and mechanisms of a 1.3 GPa grade medium-Mn steel with 51.2 % ductility

Unveiling the relationship between dislocation structure evolution and strain hardening behavior of S32654 super-austenitic stainless steel

Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel

Effect of Grain Size on the Local Deformation Behavior Associated with the Discontinuous Yielding in a High Mn Austenitic Steel

Deformation mechanism and microstructure evolution of medium-Mn AHSS under various loading conditions

Unique transition of yielding mechanism and unexpected activation of deformation twinning in ultrafine grained Fe-31Mn-3Al-3Si alloy

Effect of hot deformation mode on the microstructure evolution of lean duplex stainless steel 2101

Mesoscopic nature of serration behavior in high-Mn austenitic steel

Investigating the dislocation reactions on Σ3{111} twin boundary during deformation twin nucleation process in an ultrafine-grained high-manganese steel

Remarkable transitions of yield behavior and Lüders deformation in pure Cu by changing grain sizes

In-situ TEM investigation on deformation mechanisms of a fine-grained 316L stainless steel

Investigating the microstructural evolution during deformation of laser additive manufactured Ti–6Al–4V at 400 °C using in-situ EBSD

Investigation of lüders-like deformation bands in NiTi shape memory alloys

Suppression of Inhomogeneous Plastic Deformation in Medium-Carbon Tempered Martensite Steel

Observation of grain boundary sliding in a lamellar ultrafine‐grained steel

Strain localization and ductile fracture mechanism of micro/mesoscale deformation in ultrafine-grained pure copper

Yielding Behavior and Strengthening Mechanisms of a High Strength Ultrafine‐Grained Cr–Mn–Ni–N Stainless Steel

Postponing the Fracture Strain of Ultrafine-Grained 316LN Steel by Sequential Activations of Deformation Modes at 77 K