Abstract:The selective laser melted (SLM) 316L stainless steel (316L SS) has shown superior tensile ductility and doubled yield strength compared to its wrought counterpart. The significantly improved yield strength has been attributed to the unique cellular substructures featured by Cr/Mo-segregation and trapped dislocations. The excellent ductility of SLMed 316L SS has been mainly understood from the pronounced deformation twinning, which, however, is just one of the dominant plastic deformation mechanisms in 316L SS. Here instead, we report two other fundamental deformation micro-mechanisms, i.e., deformation faulting and dislocation cell refinement, in the SLM 316L SS. Our results showed that deformation faulting and dislocation cell refinement characterize the whole tensile deformation significantly except for deformation twinning. These newly found mechanisms synergistically dominated the deformation behavior at low strain levels while deformation faulting and twinning play a crucial role at medium and high strain levels. The pre-existing stacking faults (SFs) in cellular substructure is mainly responsible for the significant deformation faulting. At the early deformation stage, these pre-existing SFs provide faulting nuclei for deformation faulting, leading to wide SFs. These wide SFs in different cellular interiors penetrate the cellular boundaries and overlap as the strain increases, resulting in long stacking fault ribbons (SFRs). We attributed the formation of DCs to the measured medium stacking fault energy (SFE) of ∼18 mJ/m2. Upon straining, equiaxed dislocation cells (DCs) were generated by new dislocation cell walls (DCWs) inside the cellular substructure, and refined by either the dissociation of fully developed DCWs or the continuously formed new DCWs. Together with deformation twinning, these two fundamental deformation mechanisms jointly led to a steady strain hardening rate during tension and thus a superior tensile ductility of the SLM 316L SS with high yield strength. These findings provide new insights into the excellent strength-ductility combination of SLMed 316L SS and the experimental basis for crystal plasticity modeling and simulation, as well.

Unveiling the relationship between dislocation structure evolution and strain hardening behavior of S32654 super-austenitic stainless steel

Enhancing Strength and Plasticity Synergy in Transformation-Induced Plasticity-Aided Lean Duplex Stainless Steel Based on the Ultrafine-Grained Austenite

In-situ TEM investigation on deformation mechanisms of a fine-grained 316L stainless steel

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

Investigations of dislocation-type evolution and strain hardening during mechanical twinning in Fe-22Mn-0.6C twinning-induced plasticity steel

Deformation faulting and dislocation-cell refinement in a selective laser melted 316L stainless steel

Exploring structural origins responsible for the exceptional mechanical property of additively manufactured 316L stainless steel via in-situ and comparative investigations

Ferrite-austenite synergistic deformation behavior in a 2205 duplex stainless steel containing equiaxed austenite domains

MICROSTRUCTURE EVOLUTION OF LEAN DUPLEX STAINLESS STEEL 2101 DURING HOT DEFORMATION

Microstructure evolution and dynamic recrystallization mechanisms of 316L stainless steel during hot deformation

Achieving Excellent Strength–Ductility Synergy by Tailoring the Grain Size Distribution in a Metastable Austenitic Stainless Steel

Delving into the intrinsic co-relation between microstructure and mechanical behaviour of fine−/ultrafine-grained TWIP steels via TEM and in-situ EBSD observation

Microstructure Evolution and Deformation Behavior of Extruded Mg-5Al-0.6Sc Alloy during Room and Elevated Temperature Tension Revealed by Ex-Situ EBSD and VPSC

In-situ Study of Microstructural Evolution and Strain Distribution During Single Axis Tension of 316L Stainless Steel Prepared by Selective Laser Melting

Microstructure evolution and mechanical properties of martensite stainless steel during repetitive high stress Loading-Unloading with small plastic deformation

Effect of annealing and strain rate on the microstructure and mechanical properties of austenitic stainless steel 316L manufactured by selective laser melting

Dislocation-Based Plasticity and Strengthening Mechanisms in Sub 20 Nm Lamellar Structures in Pearlitic Steel Wire

Ensuring the strength and ductility synergy in an austenitic stainless steel: single- or multi-phase hetero-structures design

Enhancement of strength and ductility by Cu-rich precipitation in Cu-bearing 304L austenitic stainless steel

Intermediate stacking fault and twinning induced cooperative strain evolution of dual phase in lean duplex stainless steels with excellent cryogenic strength-ductility combinations