Abstract:Mixed-grain structure with millimeter-grade coarse grains (MCGs) is an intolerable defect often found in heavy forgings. Eliminating this microstructural defect through thermomechanical operations requires a thorough understanding on the microscopic deformation heterogeneity associated with the uneven grain size. Both in-situ and interrupted micro-tensile tests combined with a grain-level digital image correlation, microstructure tracking, surface slip tracing, and fractography examination were conducted on the intentionally prepared samples of mixed-grain structure with MCGs. Mesoscale full-field crystal plasticity (CP) modeling, incorporating a grain-level Hall-Petch law and a grain-size enhanced hardening rule, was proposed to describe the uneven grain size effect of mixed-grain structure. The agreements of simulation results with the experiments demonstrated that the proposed CP model is competent to capture the mesoscale deformation characteristics of the structures with MCGs. It was found that, during the deformation, the large deformation band covering the MCG and its surrounding fine grains (FGs) was preferentially generated because MCGs take the priority of plastic deformation, even if MCGs were hard-oriented. At large deformation, some FGs in the vicinity of MCGs inside the deformation band sustained more strain over the MCGs to coordinate the enforced deformation in the band, resulting in the intense strain and stress localizations. It was further found that the preferential and continuous deformation characteristic of the MCG is related to its 'lake' shape distribution of the number of activated slip systems (N-s), meaning that N-s is smaller in the interior than at the boundary of the MCGs. Both the TEM characterizations and CP simulations demonstrate that the MCG interior deformed in single-slip at early deformation and in primary-slip at large deformation. Compared with the FG structure, the MCGs have weaker initial slip resistance and hardening rate due to the less GB-related multiplication and storage of dislocations, and dislocation interaction in the multiple slip scenario.

Observation of grain boundary sliding in a lamellar ultrafine‐grained steel

Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel

Grain refinement and microstructural evolution of grain boundary allotriomorphic ferrite/granular bainite steel after prior austenite deformation

Grain coarsening of nano laminated structure in martensite steel under sliding wear

Grain refinement strengthening mechanism of an austenitic stainless steel: critically analyze the impacts of grain interior and grain boundary

Probing the Impact of Grain Interior and Grain Boundaries on the Mechanical Behavior of a High-Mn Austenitic Steel

Influence of austenite deformation on the microstructure strength and toughness of the grain boundary allotriomorphic ferrite/granular bainite (FGBA/GB) duplex steel

A Multiscale Investigation on the Preferential Deformation Mechanism of Coarse Grains in the Mixed-Grain Structure of 316LN Steel

Microstructural evolution during grain boundary engineering of low to medium stacking fault energy fcc materials

Exploring unusual Lüders deformation in ultrafine-grained high-Mn austenitic steel

First Direct In Situ Observation of Grain Boundary Sliding in Ultrafine Grained Noble Metal

A Grain Level Model for Deformation and Failure of Ultrafine-Grained Tungsten

Grain boundary segregation in UFG alloys processed by severe plastic deformation

Superplasticity-like behavior of ultrafine-grained austenitic steel 321

Effect of grain boundary sliding on the toughness of ultrafine grain structure steel: A molecular dynamics simulation study

Microstructure Evolution of a Hypereutectoid Pearlite Steel under Rolling-Sliding Contact Loading

The effect of microstructure on the relationship between grain boundary sliding and slip transmission in high purity aluminum

Grain Boundary Sliding and Strain Rate Sensitivity of Coarse and Fine/Ultrafine Grained 5083 Aluminum Alloys

Microstructural Evolution and Mechanical Property of Ultrafine-Grained Pearlitic Steel by Cold Rolling: the Influence of Cementite Morphology

Evident α/γ Interface Sliding in Fully Lamellar TiAl Alloy During Hot Deformation: Metallurgical Observation and Mesoscopic Modelling

Experimental investigation of dislocation-grain boundary interaction in coarse-grained high-manganese steels using quasi in situ electron channelling contrast imaging