Abstract:Using molecular dynamics (MD) simulation, the deformation mechanisms of gradient nanograined (GNG) pure iron (Fe) were investigated. Simulations of uniaxial tensile experiments were conducted on samples exhibiting different grain size gradients (GSGs). The simulation results reveal the presence of a critical GNG parameter (g), at which point the GNG-Fe attains its highest strength. The deformation mechanisms of three representative samples, namely GNG-2 with the g value at the threshold, GNG-1 with a g value smaller than the critical threshold and GNG-4 with a g value exceeding it, were thoroughly investigated. Within the coarse-grained (CG) region of GNG-1, the primary deformation mechanism is predominantly characterized by planar defects, rather than being dominated by dislocations. The mechanisms of both "strain hardening" and "softening" were observed and discussed in this region. The deformation of the coarse grains occurs in a coordinated manner, and the magnitude of the back-stress is insufficient to trigger grain boundary (GB) motion in the fine-grained (FG) region. In contrast, the deformation of the CG region in the GNG-4 primarily depends on dislocation. The "hardening" and "softening" effects of the dislocations were discussed. In the FG region of GNG-4, the grains undergo deformation primarily through GB motion, a phenomenon attributed to the significant back-stress generated by the uncoordinated deformation exhibited by the coarse grains. In the CG area of sample 2 with the g value at threshold, both dislocation- and planar defects-controlled mechanisms are observed. In the FG of this sample, neither GB migration and grain rotation are found. Only the GB width becomes larger, indicating that the back-stress transferred from the CG area makes the GB more active, but not large enough to induce the GB migration or grain rotation. The results of this work may provide some theoretical supports for the deformation mechanism of the GNG materials.

Effect of Grain Size on the Local Deformation Behavior Associated with the Discontinuous Yielding in a High Mn Austenitic Steel

Coordinated grain boundary deformation governed nanograin annihilation in shear cycling

Effect of Grain Size on Deformation and Fracture of Inconel718: an In-Situ SEM-EBSD-DIC Investigation

Probing the impact of grain size distribution on the deformation behavior in fine-grained austenitic stainless steel: A critical analysis of unimodal structure versus bimodal structure

Exploring unusual Lüders deformation in ultrafine-grained high-Mn austenitic steel

Molecular Dynamics as a Means to Investigate Grain Size and Strain Rate Effect on Plastic Deformation of 316 L Nanocrystalline Stainless-Steel

Effect of Grain Size on the Plastic Deformation Behaviors of a Fe-18Mn-1.3Al-0.6C Austenitic Steel

Local Deformation Mechanisms in Metal Systems with a Tailored Grain Size Distribution

Effect of grain size gradient on the mechanical behavior of gradient nanograined pure iron: an atomic study

Effect of Strain Localization on the Mechanical Properties from Nonuniform Grain Size Distribution of Ultralow Carbon Steel

Effect of initial microstructures on grain refinement in a stainless steel by large strain deformation

Mechanical response of dislocation interaction with grain boundary in ultrafine-grained interstitial-free steel

Unusual grain-size effects on tensile deformation behavior of twinning-induced plasticity steel with low Mn content

Grain size gradient effect on grain boundary mediated deformation of nano-grained metals

Impact of Grain Size Distribution on the Multiscale Mechanical Behavior of Nanocrystalline Materials

Confluent Effects of Initial Dislocation Microstructures on Yield Behavior in Single-Crystal Tungsten at High Temperature

The effect of grain size on deformation modes and deformation heterogeneity in a rolled Mg-Zn-Ca alloy

The synergistic effect of grain boundary and grain orientation on micro-mechanical properties of austenitic stainless steel

In-situ tensile deformation of austenitic stainless steels with various grain sizes during synchrotron and neutron diffraction

Dislocation Depleted Deformation in Nano-Grained Metals

Effects of Grain Size and Shape on Mechanical Properties of Nanocrystalline Copper Investigated by Molecular Dynamics