Abstract:Carbon nanotube field-effect transistors (CNT FETs) have been demonstrated to exhibit high performance only through low-temperature fabrication process and require a low thermal budget to construct monolithic three-dimensional (M3D) integrated circuits (ICs), which have been considered a promising technology to meet the demands of high-bandwidth computing and fully functional integration. However, the lack of high-quality CNT materials at the upper layer and a low-parasitic interlayer dielectric (ILD) makes the reported M3D CNT FETs and ICs unable to provide the predicted high performance. In this work, we demonstrate a multilayer stackable process for M3D integration of high-performance aligned carbon nanotube (A-CNT) transistors and ICs. A low-kappa (similar to 3) interlayer SiO2 layer is prepared from spin-on-glass (SOG) through processes with a highest temperature of 220 C-degrees, presenting low parasitic capacitance between two transistor layers and excellent planarization to offer an ideal surface for the A-CNT and device fabrication process. A high-quality A-CNT film with a carrier mobility of 650 cm(2) V-1 s(-1) is prepared on the ILD layer through a clean transfer process, enabling the upper CNT FETs fabricated with a low-temperature process to exhibit high on-state current (1 mA mu m(-1)) and peak transconductance (0.98 mS mu m(-1)). The bottom A-CNT FETs maintain pristine high performance after undergoing the ILD growth and upper FET fabrication. As a result, 5-stage ring oscillators utilizing the M3D architecture show a gate propagation delay of 17 ps and an active region of approximately 100 mu m(2), representing the fastest and the most compact M3D ICs to date.

Low sheet resistance buried metal bit line realized by high temperature metal CVD process in vertical channel transistor array

Computational Associative Memory with Amorphous Metal‐Oxide Channel 3D NAND‐Compatible Floating‐Gate Transistors

Monolithic Three‐dimensional Integration of Aligned Carbon Nanotube Transistors for High‐performance Integrated Circuits

Vertical Surrounding Gate Transistor for High Density and Low Voltage Operation in DRAM

Mitigating WL-to-WL Disturbance in Dynamic Random-Access Memory (DRAM) through Adopted Spherical Shallow Trench Isolation with Silicon Nitride Layer in the Buried Channel Array Transistor (BCAT)

Tungsten Contact and Line Resistance Reduction with Advanced Pulsed Nucleation Layer and Low Resistivity Tungsten Treatment

A Viable Self-Aligned Bottom-Gate MOS Transistor Technology for Deep Submicron 3-D SRAM

A Semi-Floating Gate Memory with Tensile Stress for Enhanced Performance

Simulation of capacitorless DRAM based on polycrystalline silicon with a vertical underlap structure and a separated channel layer

Passing Word Line-Induced Subthreshold Leakage Reduction Using a Partial Insulator in a Buried Channel Array Transistor

Wafer-scale fabrication of carbon-nanotube-based CMOS transistors and circuits with high thermal stability

Application of twin-bit self-rectifying via RRAM with unique diode state in cross-bar arrays by advanced CMOS Cu BEOL process

Vertical N-Type and P-Type Nanosheet FETs with C-Shaped Channel

Monolithic 3D integration of 2D transistors and vertical RRAMs in 1T–4R structure for high-density memory

Device Feasibility of 60-nm-Scaled Vertical-Channel Memory Transistors Using InGaZnO Channel and ZnO Charge-Trap Layers

Computational Associative Memory with Amorphous InGaZnO Channel 3D NAND-Compatible FG Transistors

Understanding Retention Time Distribution in Buried-Channel-Array-Transistors (BCAT) under Sub-20-Nm DRAM Node—Part I: Defect-Based Statistical Compact Model

Multiple SiGe/Si layers epitaxy and SiGe selective etching for vertically stacked DRAM

Monolithic 3D Carbon Nanotube Memory for Enhanced Yield and Integration Density

Investigation on Recrystallization Channel for Vertical C-Shaped-Channel Nanosheet FETs by Laser Annealing

A High-Density Memory Design Based on Self-Aligned Tunneling Window for Large-Capacity Memory Application