Abstract:Due to its ideal optical and electrical properties for upcoming electronic devices, Cu2O is commonly regarded as one of the most promising p-type oxides. Copper (Cu) rapidly deposits mixed phases of its oxides. This article describes the spray deposition method for developing copper oxide thin films at temperatures between 200 and 400 °C on glass substrates coated with ITO. Through optimization of the deposition temperature, Cu2O-rich phases were attained in the copper oxide films, typically around 300 °C. A Cu-rich phase was seen at 200 °C deposition temperature, and this phase progressively diminished at higher temperatures. At 400 °C, the CuO phase began to enrich the films in the meantime. Analysis using an X-ray diffraction (XRD) verified the existence of Cu2O phases (111), (200), and (220). The crystallites were discovered to be between 17.49 and 20.32 nm in size for the films deposited between 300 and 400 °C. The X-ray Photoelectron Spectroscopy (XPS) identifies Cu and oxygen as the main components. Furthermore, it is demonstrated that the deposition temperature significantly affects the copper's oxidation state. The Atomic Force Microscopy (AFM) investigation showed that as the temperature increased, surface roughness decreased. As the deposition temperature enhanced, the energy band gap of the deposited films widened from 1.67 to 2.85 eV, as observed by the UV-VIS-NIR spectrophotometer. Moreover, the fabrication of Schottky diodes with Cu metal contacts is also reported. These fabricated diodes showed a proportionate rise in barrier height with increasing deposition temperatures.

Influence of different temperatures and pH on structural, morphological, and electrochemical properties of Cu2O thin films by electrodeposition in acidic media

Effect of solution concentration on surface morphology, chemical composition and photoresponse of CuO/Cu 2 O composite thin films grown by hydrothermal synthesis

Effect of pH on the electrodeposition nucleation and growth mechanism of cuprous oxide

Microstructure, Morphology and Sunlight Response of Cuprous Oxide Thin Films

EPIR Effect of Cu2O Films by Electrochemical Deposition

Optical and Wetting Properties of CuAlO2 Films Prepared by Radio Frequency Magnetron Sputtering

Influence of Deposition Temperature on Growth Process and Opto-electronic Performance of Cu2O Thin Films

Electrochemical Deposition and EPIR Effects of Cu_2O Film

Influence of Cl- on the Morphology of Cu2O Films in Electrodeposition Processing

Controllable morphology and conductivity of electrodeposited Cu₂O thin film: effect of surfactants.

In-Depth Study of Chemically Electrodeposited Cuprous Oxide (Cu2O) thin Films on ITO Glass

Effect of CuI Layer on Photoelectrochemistry of Cu2O Films

Study of Deposition Temperature Effect on Spray-Deposited Copper Oxide Thin Films and Its Schottky Diodes

Study of the structural, optical, electrical and electrochemical properties of copper oxide thin films synthesized by spray pyrolysis

Electrodeposition of Phase–Pure n–Type Cu 2 O: Role of Electrode Reactions and Local pH

Morphology transformation of Cu2O thin film: different environmental temperatures employing chemical method

Modulation of Dendrite Growth of Cuprous Oxide by Electrodeposition

Epitaxial Electrodeposition of Cu2o Films Onto Inp(001)

Electrodeposition and Optical Properties of Highly Oriented Γ-Cui Thin Films

Optical and Electrical Properties of Copper Oxide Thin Films Synthesized by Spray Pyrolysis Technique

Transformation of CuO Nanoparticles in the Aquatic Environment: Influence of Ph, Electrolytes and Natural Organic Matter