Abstract:This paper explores interactions between multiple operating modes by exploiting a specifically designed piezoelectric motor. The stator includes a hollow polygon bar and two piezoelectric ceramic (PZT) plates. PZT plates were symmetrically bonded onto a brass substrate and used to actuate vibrational modes of stator. The presented motor can operate in three types of vibrational modes which are the second-order in-plane bending modes, the third-order in-plane bending modes and the first-order out-of-plane bending modes. These working modes can be excited independently or simultaneously. Moreover, each group of operating modes can both be actuated by applying single-phase and two-phase driving voltages to PZT plates. In order to produce all these vibration states, the structural parameters of stator are strictly designed to harmonize two eigenfrequencies of each type of vibrational modes by using finite element software ANSYS. After that, displacement characteristics of stator driving particles under different vibration states are all calculated to evaluate mutual effects of three kinds of operating modes. Simulation results reveal that these bending modes can be excited simultaneously and interact with each other. Vibration amplitude and trajectory of stator driving points can also be influenced. The response displacement of stator driving points reaches the maximum value when modes I and II are excited at the same time by supplying single-phase excitation voltage under the premise that its three-dimensional motion trajectory does not deform. The motor performances under this condition are also investigated experimentally. The dimension of the fabricated prototype motor is 10 mm×10 mm×20 mm. The stall torque is 0.2 N·m under 200 V single-phase excitation, when the motor operates in modes I and II simultaneously. The maximum no-load speed is 74 r/min.

Characteristics and attenuation mechanism of linear standing-wave piezoelectric motors with ceramics-mated friction couples

Experimental Investigation on Friction Characteristics of Ultrasonic Motor

Non-smooth Model and Numerical Analysis of a Friction Driven Structure for Piezoelectric Motors

Research on the Influence of Friction Pairs on the Output Characteristics of the Piezoelectric Ultrasonic Actuator

Measurement and evaluation on mechanical performances of standing-wave piezoelectric motor of V-shaped sandwich-type transducer having arc tip

Driving characteristics of ultrasonic motor with different application mode of friction material

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

The design and test of a new kind of piezoelectric motor based on standing wave and multilayer

Study on piezoelectric standing wave rotary motor

Standing Wave-Type Bi-Directional Linear Moving Ultrasonic Motor Using Plates and Weak Links

Design and Experimental Study of Piezoelectric Ceramics Linear Motor

Wave propagations of curvilinear motors driven by partially laminated piezoelectric actuators

Vibration Analysis of Stepping Piezoelectric Micro-Motor Using Wiggle Mode

On the friction and noise in piezoelectric ultrasonic motor

Research on novel inertial linear ultrasonic piezoelectric motor

Resonant-type Inertia Linear Piezoelectric Motor Based on a Synchronized Switching Stimulated by Harmonic Synthesized Mechanical Square Wave

Friction and Wear Behavior of Linear Standing-Wave Ultrasonic Motors with V-shape Transducers

Research on interactions between different operating modes of piezoelectric motors

Design of a Piezoelectric Motor Driven by Sawtooth Wave and Analysis of the Performance

A Study of Linear Piezoelectric Inchworm Motor Using Position Gripped Ultrasonic Vibrator

Investigation on Driving Characteristics of a Piezoelectric Stick–slip Actuator Based on Resonant/off-Resonant Hybrid Excitation