Abstract:Commonly, the shear piezoelectric constant value for d15 is almost two times higher than those for d33 and d31. Also the value of share electro-mechanical coupling coefficient k15 is higher than those of k31 and k33. Sometimes a design for ultrasonic motor based on share coefficients d15 has the potential for superior performance. In the paper, we propose a new mechanism for exciting shear-bending vibration in piezoelectric ceramic rod. A solid piezoelectric ceramic rod is polarized along its axial direction. The surface of the cylindrical rod used as an electrode is plated with nickel. The cylindrical electrode was divided into four pairs and each pair has two parts symmetrically along the axes. If opposite voltage signals are applied to the electrode parts which are opposite on circumferential direction or along the axial direction, a shearing strain should be induced on the piezoelectric ceramic. Using a pair of alternating voltage signals (sine and cosine) on four pairs of electrodes, a shaking head vibration (wobbling motion) was generated circumferentially. A mini-ultrasonic motor prototype with this concept and a diameter of 6mm was designed. And its characteristics were determined experimentally. The design concept presented in this paper is much promising for applications in small motors, especially in those with piezoelectric ceramic rod stators with a large diameter-length ratio.

Study on piezoelectric standing wave rotary motor

Study on piezoelectric traveling wave rotary motor with high resolution

Study on Characteristics of Standing Wave Motors

Standing Wave-Type Bi-Directional Linear Moving Ultrasonic Motor Using Plates and Weak Links

The design and test of a new kind of piezoelectric motor based on standing wave and multilayer

A Radial-Torsional Vibration Hybrid Type Ultrasonic Motor

Ultrasonic Micro-Motor with Multilayer Piezoelectric Ceramic and Chamfered Driving Tips

Research and application on piezoelectric ceramic component with shear modes for micro-ultrasonic motor

Standing Wave Bi-directional Linearly Moving Ultrasonic Motor

Design and Property of a Square Cylinder Type Piezoelectric Ultrasonic Micromotor

An L-shaped Ultrasonic Linear Piezoelectric Motor with Two Second-Order Bending Coupling Modes

A Novel Piezoelectric Micro-Motor Using Multilayer Co-Firing Piezoelectric Ceramics

Design of a Piezoelectric Motor Driven by Sawtooth Wave and Analysis of the Performance

Development of a Radial-Torsional Vibration Hybrid Type Ultrasonic Motor with a Hollow and Short Cylindrical Structure

A New Standing-Wave-type Linear Ultrasonic Motor Based on In-Plane Modes.

Study of a Mini-Ultrasonic Motor with Square Metal Bar and Piezoelectric Plate Hybrid

Experimental Study of Ultrasonic Motor Using Longitudinal and Torsional Mode

Measurement and evaluation on mechanical performances of standing-wave piezoelectric motor of V-shaped sandwich-type transducer having arc tip

Study on piezoelectric cylinder micro ultrasonic motor with 1 mm diameter

Design and Experiment of Annular Piezoelectric Ultrasonic Motor with Multi-Frequency Driving

Study on Moving Mechanism of a Rotatory Type Standing Wave Ultrasonic Motor with Single Phase Driver