Abstract:Heat treatment is the most common method to relieve residual stress and to adjust tensile properties in additively manufactured material. However, the well-known strengthening factors (e.g., dislocation density, cellular sub-structure, low angle grain boundaries, nano-oxide particle) in selective laser melted 316L (SLM 316L) are strongly influenced by heat-treatment temperature. In this work, horizontal and vertical oriented SLM 316L specimens are heat treated from 550 ℃ to 1150 ℃, followed by tensile tests and microstructural characterization. With increasing temperature, strength (e.g., yield strength, ultimate tensile strength) is found to decrease and elongation is found to increase. The heat treatments of 550 ℃, 650 ℃ and 750 ℃ lead to coarsening of cellular sub-structure. Furthermore, the cellular sub-structure and melt boundaries annihilate at 950 ℃. When the temperature reaches 1150 ℃, SLM 316L has finished recrystallization with volume fraction of nano-oxide particles increasing greatly. Based on microstructural characterization, the proposed model, considering strengthening mechanisms of cellular sub-structure, nano-oxide particle and grain boundaries, give satisfactory accuracy to predict yield strength for horizontal orientation. The yield strength for vertical orientation can also be predicted by this model when modified by consideration of anisotropy of columnar grains and lack-of-fusion defects. The anisotropy and lack-of-fusion lead to 5.4% reduction in yield strength for the vertical orientation. This work establishes quantitative relationships for heat treatment-microstructure-property, in which the anisotropy of tensile properties is considered.

Theoretical model of yield strength for eutectic colony microstructure materials

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

MODELLING THE YIELD STRENGTH AND DUCTILITY IN COMPOSITE NANOTWINNED COPPER

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys

A physically-based constitutive model for the prediction of yield strength in the precipitate-hardened high-entropy alloys

Modeling of Yield Strength in Binary Hypoeutectic Alloy under High Pressure Solidification

Microstructural length scale manipulation via solidification and its influence on mechanical behavior in a high-strength intermetallic-based eutectic alloy

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

A general physics-based hardening law for single phase metals

Prediction of Yield Strength at Room Temperature for Squeeze Cast A226

Theoretical prediction of the temperature-dependent yield strength of solid solution strengthening Nickel-based alloys

Microstructure based analysis and predictive modeling of cast Al7Si1.5Cu0.4Mg alloy mechanical properties

Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys

Relationship between strength and uniform elongation of metals based on an exponential hardening law

A new constitutive model for high strength structural steels

Physical mechanism interpretation of polycrystalline metals’ yield strength via a data-driven method: A novel Hall–Petch relationship

On the superposition of strengthening mechanisms in dispersion strengthened alloys and metal-matrix nanocomposites: Considerations of stress and energy

Temperature-Dependent Yield Strength of Nanoprecipitate-Strengthened Face-Centered Cubic High Entropy Alloys: Prediction and Analysis