Abstract:Hierarchical twin lamellae in polycrystalline face-centered cubic (fcc) metals possess a possibility to achieve higher strength with keeping an acceptable elongation. The present work is concerned with the analysis of twin spacing and grain size-dependent plastic performance in hierarchically nanotwinned fcc metals using a generalized strain-gradient plasticity model. The dislocation density-based physical model for constitutive description of nanotwinned fcc metals is expanded for the hierarchical structures of nanotwins. The strengthening mechanism and the failure behavior in these hierarchical nanostructures are studied to evaluate the strength and ductility. Moreover, the transition twin spacing between the strengthening and softening is obtained in different order of twin lamellae. A dislocation-based model on nucleating deformation twins is presented to predict the critical twin spacing in the lowest twin lamellae for generating the subordinate twin lamellae. Our simulation results demonstrate that the existence of the hierarchical nanotwins gives rise to a significant enhancement in the strength, and the resulting global flow stresses are sensitive to the twin spacings of the hierarchical twin lamellae and the grain size. Two softening stages are observed with variation of twin spacing, and the relevant transition twin spacing depends on the microstructural size in hierarchically nanotwinned metals. We further find that the predicted failure strain decreases with decreasing the twin spacing, which is quite different from the case of the individually nanotwinned fcc metals. The critical twin spacing for generating subordinate twins also depends on the twin spacing of superordinate twin lamellae and the grain size. These findings suggest that the high yield strength and good ductility can be achieved by optimizing the grain size and the twin spacings in the hierarchical twins.

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

MODELLING THE YIELD STRENGTH AND DUCTILITY IN COMPOSITE NANOTWINNED COPPER

A statistical model for predicting the mechanical properties of nanostructured metals with bimodal grain size distribution

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Modelling the Plastic Deformation of Nanostructured Metals with Bimodal Grain Size Distribution

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Micromechanical simulation of fracture behavior of bimodal nanostructured metals

Computer Simulation of Strength and Ductility of Nanotwin-Strengthened Coarse-Grained Metals

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Atomistic and Theoretical Insights on Nanoprecipitates-Controlled Strengthening Behavior for Optimum Mechanical Performance in Nanotwinned NiCoCr Alloys

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

The Direct and Indirect Effects of Nanotwin Volume Fraction on the Strength and Ductility of Coarse-Grained Metals

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

On the Role of Hierarchical Twins for Achieving Maximum Yield Strength in Nanotwinned Metals

Surface Stress Effects On The Yield Strength In Nanotwinned Polycrystal Face-Centered-Cubic Metallic Nanowires

Tensile Failure Modes in Nanograined Metals with Nanotwinned Regions

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model