Abstract:The effects of volume fraction, size, and type of reinforcement particles on the microstructure and mechanical properties of Al–Si–Cu–(Fe) alloy matrix composites were investigated and an analytical model was modified to predict the yield strength of the particle-reinforced nanocomposites. Nano- and micro-particle-reinforced Al–Si–Cu-(Fe) matrix composites (N-AMCs and M-AMCs) were manufactured by adding two different types and sizes of reinforcement particles to Al–Si–Cu–(Fe) alloys at different volume fractions using a two-step stir casting method combined with a high-energy ball milling process and a high-pressure die-casting method. Microstructural analyzes of N-AMCs and M-AMCs were performed using SEM, EDX, and XRD. The Brinell hardness test and the tensile test were carried out to determine the mechanical properties of the N-AMCs and M-AMCs. The hardness of the N-AMCs and M-AMCs was continuously enhanced by increasing the volume fraction of the reinforcement particles, while the yield strength and ultimate tensile strength of the N-AMCs and M-AMCs were improved up to 1.5 vol.% and 4 vol.% of nano-particles and micro-particles, respectively. An analytical model was modified to predict the yield strength of N-AMCs by integrating the effective volume ratio of nano-particles into each strengthening mechanism. The results predicted by the modified model reached nearly 98% agreement with the experimental results up to 1.5 vol.% of the reinforcement particles. Nano-particles had a much greater effect on strengthening mechanisms compared to micro-particles.

Micromechanical Simulation on Strength and Ductility of Two Kinds of Al-based Nanostructural Materials

Macro-micro Analysis of Mechanical Properties of Al0.6CoCrFeNi High-Entropy Alloy Particle-Reinforced Al-based Composites

Micromechanical Simulation of Fracture Behavior of Nanostructured Metals with Bimodal Grain Size Distribution

Prediction of Mechanical Properties in Bimodal Nanotwinned Metals with a Composite Structure

Micromechanical simulation of fracture behavior of bimodal nanostructured metals

MODELLING THE YIELD STRENGTH AND DUCTILITY IN COMPOSITE NANOTWINNED COPPER

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

A statistical model for predicting the mechanical properties of nanostructured metals with bimodal grain size distribution

Modelling the Plastic Deformation of Nanostructured Metals with Bimodal Grain Size Distribution

Simulating Size and Volume Fraction-Dependent Strength and Ductility of Nanotwinned Composite Copper

Microstructure‐Property Relations in the Tensile Behavior of Bimodal Nanostructured Metals

Micromechanical modeling for mechanical properties of gradient-nanotwinned metals with a composite microstructure

A New Micromechanical Model of Cnt-Metal Nanocomposites with Random Clustered Distribution of Cnts

3D Micromechanical Simulation of the Mechanical Behavior of an In-Situ Al3Ti/A356 Composite

Structural modeling and mechanical research of carbon nanotube reinforced aluminum matrix composites using strain gradient theory

Microstructure-Based Computer Simulation And Mechanical Modeling Of Particle-Reinforced Composites

Microstructure-based Modeling on Structure-Mechanical Property Relationships in Carbon Nanotube/aluminum Composites

Microstructure and mechanical properties of Al–Si–Cu–Fe alloy-based ceramic particle-reinforced nanocomposites and microcomposites and a modified model to predict the yield strength of nanocomposites

Particle Distribution-Dependent Micromechanical Simulation on Mechanical Properties and Damage Behaviors of Particle Reinforced Metal Matrix Composites

Microscale Simulation on Mechanical Properties of Al/Ptfe Composite Based on Real Microstructures

Computational Structural Modeling and Mechanical Behavior of Carbon Nanotube Reinforced Aluminum Matrix Composites