Abstract:Wrought nickel-based Alloy 825 is widely used in the oil and gas industries, attributed to its high strength at temperatures up to 540 °C. However, differences in mechanical properties arise in finished components due to variations in both grain size and dislocation density. Numerous experimental studies of the strengthening mechanisms have been reported and many models have been developed to predict strengthening under thermomechanical processing. However, there are debates surrounding some fundamental issues in modeling and the interpretation of experimental observations. Therefore, it is important to understand the evolution of strain within the material during the hot-forging process. In addition, there is a lack of research around the behavior during hot deformation and subsequent stabilization of Alloy 825. This article investigates the origin of this strength and considers a variety of strengthening mechanisms, resulting in a quantitative prediction of the contribution of each mechanism. The alloy is processed with a total forging strain of 0.45, 0.65, or 0.9, and subsequent annealing at a temperature of 950 °C, reflecting commercial practice. The microstructure after annealing is similar to that before annealing, suggesting that static recovery is dominant at this temperature. The maximum yield strength and ultimate tensile strength were 348 MPa and 618 MPa, respectively, obtained after forging to a true strain of 0.9, with a ductility of 40%. The majority of strengthening was attributed to grain refinement, the dislocation densities that arise due to the large forging strain deformation, and solid solution strengthening. Precipitate strengthening was also quantified using the Brown and Ham modification of the Orowan bowing model. The results of yield strength calculations are in excellent agreement with experimental data, with less than 1% difference. The interfacial energy of Ti(C,N) in the face-centered cubic matrix of the current alloy has been assessed for the first time, with a value of 0.8 mJm−2. These results can be used by future researchers and industry to predict the strength of Alloy 825 and similar alloys, especially after hot-forging.

Theoretical prediction of the temperature-dependent yield strength of solid solution strengthening Nickel-based alloys

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Modeling the Strain Rate-Dependent Constitutive Behavior in Nanotwinned Polycrystalline Metals

Temperature-Dependent Yield Strength of Nanoprecipitate-Strengthened Face-Centered Cubic High Entropy Alloys: Prediction and Analysis

Predicting Yield Stress in a Nano-Precipitate Strengthened Austenitic Steel by Integrating Multi Length-Scale Simulations and Experiments

Solid-solution strengthening effects in binary Ni-based alloys evaluated by high-throughput calculations

Atomistic modeling for the extremely low and high temperature-dependent yield strength in a Ni-based single crystal superalloy

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Modelling of Strengthening Mechanisms in Wrought Nickel-Based 825 Alloy Subjected to Solution Annealing

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

A Model for Prediction of Yield Stress of Heat Treated Al-7Si-Mg Cast Alloys

The Temperature-Dependent Strength of Metals: Theory and Experimental Validation

Theoretical Modeling of Temperature, Strain Rate and Porosity Dependent Yield Strength of Porous Metallic Material

A New Constitutive Model Based on Taylor Series and Partial Derivatives for Predicting High-Temperature Flow Behavior of a Nickel-Based Superalloy

Interfacial dislocation evolution and yield mechanism of nickel-based single crystal superalloy: A molecular dynamics research

Modeling the Precipitation Kinetics and Tensile Properties in Al-7si-Mg Cast Aluminum Alloys

Modeling of Yield Strength in Binary Hypoeutectic Alloy under High Pressure Solidification

Modelling Investigation of Precipitation Kinetics and Strengthening for Needle/Rod-Shaped Precipitates in Al-Mg-Si Alloys

Modeling Microstructure and Yield Strength during Solidification and Heat Treatment Process in Al-7Si-Mg Cast Aluminum Alloys

Temperature effects on tensile behaviors and relevant deformation mechanisms of a low-cost nickel-based single crystal superalloy containing 1.5% Re