Abstract:In the present work, three kinds of precipitates with different morphologies, structures, sizes, and volume fractions were obtained via energetically-tuning the microstructures of the nano-precipitated CoCrFeNiTi0.2 high-entropy alloy (HEA). Subjected to the heavy cold rolling immediately after homogeneous precipitation, L12 structured spherical nano-particles with an average size of 16.5 nm rapidly grow into 200 nm-sized spherical ones due to Ostwald ripening. On the other hand, superfluous mechanical energy storage energetically facilitates the phase transformation from spherical L12 to rod-shaped D024 structures for initially formed nano-precipitates. Besides, some other newly formed nano-precipitates with an average size of 6.5 nm are available, originating from heavily plastically deformed-induced nucleated sites. Multi-scale precipitates interact with dislocations in different ways. The strengthening provided by dislocations cutting through smaller nano-particles and bypassing grown ones account for 57.7% and 42.3% of precipitation strengthening, respectively, while rod-shaped precipitates can act as equivalent interfaces to hinder dislocation movement. Their synergistic effect has achieved remarkable strengthening and toughening. Specially, dislocation slips dominate at 298 K, while stacking faults (SFs) assist plastic deformation at 77 K. Compared with 298 K, the yield strength (YS) and ultimate tensile strength (UTS) of the current HEAs at 77 K are increased by 38.9% and 38.2% to 1 GPa and 1.5 GPa, respectively, and the tensile strain is slightly increased to 35% instead of loss, realizing excellent strength and plasticity combination. Theoretically established strengthening models agree well room-temperature and cryogenic yield strengths experimentally. Moreover, the tensile elongation is effectively predicted by the Whitehouse-Clyne model. This strengthening strategy of energetically-tuning polymorphous precipitates provides the basic guidance to develop high-performance nano-precipitated alloys. The current strengthening and plasticity models can be employed to well predict the mechanical properties of such kinds of alloys at cryogenic temperatures.

Temperature-Dependent Yield Strength of Nanoprecipitate-Strengthened Face-Centered Cubic High Entropy Alloys: Prediction and Analysis

Physics-based Model to Predict Yield Strength of Single-Phase FCC High-Entropy Alloys over Wide Temperature Range

Temperature effect on tensile behavior of an interstitial high entropy alloy: Crystal plasticity modeling

Dynamic impact behavior and deformation mechanisms of Cr(26)Mn(20)Fe20Co(20)Ni(14) high-entropy alloy

Tailoring Phase Transformation and Precipitation Features in a Al21Co19.5Fe9.5Ni50 Eutectic High-Entropy Alloy to Achieve Different Strength-Ductility Combinations

Remarkable Cryogenic Strengthening and Toughening in Nano-Coherent CoCrFeNiTi 0.2 High-Entropy Alloys via Energetically-Tuning Polymorphous Precipitates

Remarkable cryogenic strengthening and toughening in nano-coherent CoCrFeNiTi0.2 high-entropy alloys via energetically-tuning polymorphous precipitates

A physically-based constitutive model for the prediction of yield strength in the precipitate-hardened high-entropy alloys

First principles prediction of yield strength of body centered cubic structured high entropy alloys

Tailoring nanoprecipitates for ultra-strong high-entropy alloys via machine learning and prestrain aging

A micromechanical study on the effects of precipitation on the mechanical properties of CoCrFeMnNi high entropy alloys with various annealing temperatures

Tailoring Multi-Type Nanoprecipitates in High-Entropy Alloys Towards Superior Tensile Properties at Cryogenic Temperatures

Achieving High Strength and Good Ductility in a Nb-Containing CoCrNi-Based High-Entropy Alloy by Grain Boundary and Precipitates Strengthening

Lattice-distortion Dependent Yield Strength in High Entropy Alloys

High-temperature tensile behavior and constitutive model in Co-free Fe40Mn20Cr20Ni20 high-entropy alloy

Modeling the Effect of Temperature on the Yield Strength of Precipitation Strengthening Ni-base Superalloys

Cryogenic Strengthening of Fe27Co24Ni23Cr26 High-Entropy Alloys Via Hierarchical Nanotwin-Driven Mechanism

Probing the Lattice-Distortion Effect on Yield Strengths in High Entropy Alloys

Hierarchical toughening mechanisms in face centered cubic CoCrFeMnNi high-entropy alloy at room temperature and cryogenic temperatures

Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures

Temperature-dependent yield stress of single crystals of non-equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloys in the temperature range 10-1173 K