Abstract:Heterostructured high-entropy alloys (HEAs) exhibit a good combination of strength and ductility. However, the deformation mechanisms and related mechanical properties of the heterogeneous nanostructured body-centred cubic (BCC) HEAs remain largely unrevealed. Here, we report the effect of the strain rate on the mechanical properties and microstructural evolution in the heterostructured Al3CoCrCuFeNi HEA with the gradient grain size ranging from 9 nm at the surface to 45 nm in the center using the large-scale atomic simulations. Based on the characterization of microstructure evolution from the atomic simulation, a microstructure-based constitutive model that utilizes a single parameter set is established to study the effects of the multiple strengthening mechanisms at different stages on the strength and strain hardening of the heterostructured HEA under different strain rates. The results show that the plastic deformation mechanisms are strongly influenced by the strain rate in the range of 1 × 106 to 1 × 1010 s−1. The dislocation and deformation twin are the main deformation mechanisms at the strain rate less than 1 × 108 s−1. The deformation twinning cooperated with multiple phase transformations plays a pivotal role at the strain rate of 1 × 109 s−1. The multiple phase transformations are the dominant plastic deformation model at the strain rate of 1 × 1010 s−1, which is different from the classic plastic-deformation mode, including the dislocation and deformation twin in traditional alloys. This phenomenon is ascribed to various types of atomic interactions and atomic-size mismatches, which produce strong lattice distortion. In particular, a large number of edge dislocations are observed, which is extremely different from screw dislocations invariably generated in traditional BCC alloys, and thus, could be responsible for high strength. Furthermore, the stress-strain response of the Al3CoCrCuFeNi HEA is derived from the individual contributions of the lattice distortion, dislocation, grain boundary, deformation twin, phase transformation, and back-stress strengthening mechanisms. The heterogeneous grain boundaries and lattice distortion contribute the most to the yield strength, and the dislocation, deformation twin, phase transformation, and back stress dominate the strain hardening. Therefore, these results highlight a new design strategy of HEAs to tailor their mechanical properties based on the partition of the multistage strengthening mechanisms by the heterostructure.

A multi-scale constitutive model for analyzing the tensile deformation of eutectic high-entropy alloys

Tensile properties and strengthening mechanisms of eutectic high-entropy alloys induced by heterostructure

Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Study on thermal deformation constitutive model of NiCoFeAlCrMo high-entropy alloy with FCC / L12 coherent structure

High-temperature tensile behavior and constitutive model in Co-free Fe40Mn20Cr20Ni20 high-entropy alloy

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

Cyclic plasticity of an interstitial high-entropy alloy: experiments, crystal plasticity modeling, and simulations

The influence of heat treatment on microstructure and mechanical response of a newly developed non-equimolar AlCrCuFeNi high-entropy alloy: Experiments and numerical modeling

Temperature effect on tensile behavior of an interstitial high entropy alloy: Crystal plasticity modeling

Multiscale-phase-driven strength-ductility synergy in Fe3Cr2CoNiAlx high entropy alloys

Predictive Models based on Deep Learning Algorithms for Tensile Deformation of AlCoCuCrFeNi High-entropy alloy

Plasticity Improvement in a Co-Rich Co40Fe25Cr20Ni15 High-Entropy Alloy via Al Alloying

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Microstructural origins of enhanced work hardening and ductility in laser powder-bed fusion 3D-printed AlCoCrFeNi 2.1 eutectic high-entropy alloys

Plasticity Improvement in a Co-Rich Co<sub>40</sub>Fe<sub>25</sub>Cr<sub>20</sub>Ni<sub>15</sub> High-Entropy Alloy via Al Alloying

Mechanical Properties of AlCrFeCuNi High Entropy Alloy: A Molecular Dynamics Study

Effect of Al addition on the microstructures and deformation behaviors of non-equiatomic FeMnCoCr metastable high entropy alloys

A Physical Mechanism-Based Model of CoCrFeMnNi High Entropy Alloy Considering Adiabatic Heat Effect for Hot Bulk Forming Processes