Cyclic plasticity of an interstitial high-entropy alloy: experiments, crystal plasticity modeling, and simulations

Xiaochong Lu,Jianfeng Zhao,Chao Yu,Zhiming Li,Qianhua Kan,Guozheng Kang,Xu Zhang
DOI: https://doi.org/10.1016/j.jmps.2020.103971
IF: 5.582
2020-09-01
Journal of the Mechanics and Physics of Solids
Abstract:<p>The development of high-entropy alloys (HEAs) comprising multiple principal components is an innovative design strategy for metallic materials from the perspective of thermodynamic entropy. However, despite their potential candidacy for engineering applications, the lack of research on the cyclic loading responses as well as constitutive modeling of the HEAs is a major constraint. Therefore, the present work focuses on the cyclic plasticity of a typical carbon-doped interstitial HEA (iHEA) with nominal composition Fe<sub>49.5</sub>Mn<sub>30</sub>Co<sub>10</sub>Cr<sub>10</sub>C<sub>0.5</sub> (at.%). The results of stress-controlled cyclic tests with nonzero mean stress showed that the iHEA exhibits significant cyclic hardening and stress level–dependent ratcheting. Owing to its improved cyclic hardening, the saturated ratcheting strain rate of the iHEA is lower than that of conventional steels such as the 316L stainless steel. Furthermore, microscopic characterizations revealed that the cyclic deformations caused massive martensitic phase transformation and hierarchical structures in the iHEA. The experimental results were used to develop a physical mechanism-based crystal plasticity constitutive model that is capable of describing the cyclic plasticity of the iHEA, which is implemented into a finite element framework. The simulation results showed that the loading stress significantly affected the microstructural evolutions, leading to a stress level–dependent cyclic plasticity. Thus, this investigation provides a fundamental basis for fatigue tests and service life prediction/optimization of the iHEA in the future, which can promote its engineering applications.</p>
mechanics,materials science, multidisciplinary,physics, condensed matter
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is the lack of research on the response of high - entropy alloys (HEAs) under cyclic loading conditions and their microstructure evolution mechanisms. Specifically, the paper focuses on a typical carbon - doped interstitial high - entropy alloy (iHEA) with a nominal composition of Fe49.5Mn30Co10Cr10C0.5 (atomic percentage). Through experiments, crystal plasticity modeling and simulation, the cyclic plastic behavior of this material under different stress levels, especially cyclic hardening and stress - level - dependent ratcheting, was investigated. ### Main research questions: 1. **Cyclic plastic behavior**: Investigate the cyclic plastic behavior of iHEA under different stress levels, especially cyclic hardening and ratcheting. 2. **Microstructure evolution**: Reveal the microstructure changes of iHEA during cyclic deformation through microstructure characterization techniques (such as electron back - scatter diffraction (EBSD) and electron channel contrast imaging (ECCI)). 3. **Modeling and prediction**: Develop a crystal plasticity constitutive model based on physical mechanisms and apply it in a finite - element framework to predict the cyclic plastic behavior of iHEA. ### Research background: - **Development of high - entropy alloys**: Due to their multi - principal - element composition and high - entropy characteristics, high - entropy alloys show great potential in engineering applications. - **Lack of research on cyclic loading response**: Although high - entropy alloys perform well in static mechanical properties, relatively little research has been done on their response under cyclic loading conditions and constitutive models. - **Engineering applications of materials**: Understanding the behavior of materials under cyclic loading conditions is crucial for evaluating their fatigue life and optimizing their service life. ### Research methods: - **Experimental testing**: Conduct stress - controlled cyclic tests and record the stress - strain curves under different stress levels. - **Microstructure characterization**: Use EBSD and ECCI techniques to observe the microstructure changes of the material after cyclic deformation. - **Modeling and simulation**: Based on the experimental results, develop a crystal plasticity constitutive model and verify the accuracy of the model through finite - element simulation. ### Key findings: - **Cyclic hardening**: iHEA shows significant cyclic hardening during cyclic loading. - **Stress - level - dependent ratcheting**: The ratcheting strain rate of iHEA changes with the stress level. - **Microstructure changes**: Cyclic deformation leads to the formation of a large number of martensitic phase transformations and layered structures, which promote the occurrence of cyclic hardening. Through these studies, the paper provides an important basis for fatigue testing and service life prediction of high - entropy alloys in practical engineering applications.