Abstract:High entropy alloys (HEAs) have garnered significant attention in recent years, primarily focusing on alloying design and thermal processing. The objective of this study was to investigate the mechanical response of Al0.3CoCrFeNi, a representative HEA, under various stress states, temperatures, and strain rates, aiming to establish its constitutive equation and fracture criteria. Employing a hybrid FEM/EX approach, the constitutive behaviour of the alloy was characterized using the modified Johnson-Cook (MJC) model, while the fracture properties were assessed using the Hosford-Coulomb (HC) equation. Experimental findings highlighted the remarkable tensile strength (578.1 MPa) and ductility (69%) of the as-cast Al0.3CoCrFeNi at room temperature. However, at elevated temperatures ranging from 400 °C to 650 °C, a reduction in ductility was observed, accompanied by serration behaviour. Notably, precipitation hardening was detected at 800 °C, indicative of strengthening through precipitate formation. Additionally, Al0.3CoCrFeNi exhibited significant strain rate sensitivity and a positive strain rate effect, emphasizing its dynamic response under different loading conditions. The accuracy of the constitutive model and fracture criteria was validated through the examination of deformation and fracture modes in Taylor impact tests. The MJC model demonstrated predictions within a 10% deviation from experimental data, while the HC fracture criterion, accounting for stress triaxiality and Lode parameters, effectively predicted shear fracture in the projectiles. Crack formation in the projectiles resulted from a combination of tension and shear, followed by propagation at a 45° angle under combined compression and shear loading. This comprehensive study enhances understanding of the mechanical properties of Al0.3CoCrFeNi, providing valuable insights for its application in engineering, particularly in impact protection.

Dynamic behavior of CrMnFeCoNi high-entropy alloy in impact tension

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Dynamic impact behavior and deformation mechanisms of Cr26Mn20Fe20Co20Ni14 high-entropy alloy

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

Deformation and damage of equiatomic CoCrFeNi high-entropy alloy under plate impact loading

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Dynamic Mechanical Behavior and Microstructure of the Al 0.1 CoCrFeNiTi x High‐Entropy Alloys

Microstructural evolution and mechanical properties of FeCoCrNiCu high entropy alloys: a microstructure-based constitutive model and a molecular dynamics simulation study

Dynamic Behavior of Additively Manufactured FeCoCrNi High Entropy Alloy

Mechanical properties and microstructure of the Al0.3CoCrFeNiTi0.3 high entropy alloy under dynamic compression

Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy

Molecular dynamics analysis of the low-temperature shock behavior of the CoCrFeMnNi high-entropy alloy

Mechanical Properties of AlCrFeCuNi High Entropy Alloy: A Molecular Dynamics Study

Cyclic plasticity of an interstitial high-entropy alloy: experiments, crystal plasticity modeling, and simulations

A review on the dynamic-mechanical behaviors of high-entropy alloys

Tensile mechanical properties of CoCrFeNiTiAl high entropy alloy via molecular dynamics simulations

Mechanical behavior and shear band of a powder-metallurgy-fabricated CoCrFeMnNi high-entropy alloy during high strain-rate deformation

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Investigation of mechanical behavior, constitutive modeling, and fracture criteria for as-cast Al0.3CoCrFeNi high entropy alloy

Temperature-dependent dynamic compressive properties and failure mechanisms of the additively manufactured CoCrFeMnNi high entropy alloy