Abstract:Some high-entropy alloys, which contain two or more component phases with highly different properties, can achieve an outstanding combination of high strength and high ductility, and even break in the strength-ductility trade-off. However, a detailed atomic-scale mechanism of the dynamic continuous microstructural evolution has not hitherto been performed, to limit the achievement of bulk dual-phase high-entropy alloys with the improved strength and toughness. Here we report the deformation and plasticity as well as strength in the dual-phase nanocrystalline high-entropy alloys with a variable volume fraction of face-centered-cube (FCC) and hexagonal closed-packed (HCP) phases using atomistic simulations during the tensile-straining tests. The results show that the amplitudes of additional interaction stresses and strains rely on such factors as the differences in the mechanical property and volume fraction of each phase. Due to the complexity of the phase and phase boundary, the mechanical properties of the dual-phase nanocrystalline high-entropy alloys, in general, cannot be accurately estimated on the basis of the simple mixed laws, which are dependent upon the volume fraction and yielding strength of individual phase. The aim of this study is to describe how the phase volume fractions affect the mechanical properties in the dual-phase high-entropy alloys. The flow stress and work hardening of the dual-phase high-entropy alloys can be explained on the basis of the mobile dislocation density and dislocation-induced phase transformation in the corresponding phases. The HCP-based high-entropy alloys show the good plasticity and high strength, and are unlike traditional alloys with the low ductility, owing to the occurrence of the HCP to FCC phase transformation. The strength of the dual-phase high-entropy alloy with the 16.7% FCC-phase volume fraction exceeds that of HCP-based or FCC-based matrix, due to the stronger interface hardening. We expect that these results would be helpful for designing and selecting dual-phase high-entropy alloys with great strength and good ductility in various engineering applications.

Probing Phase Transformation and Dislocation Evolution in High-Entropy Alloy under Cyclic Loadings

Transformation induced softening and plasticity in high entropy alloys

Dynamic impact behavior and deformation mechanisms of Cr(26)Mn(20)Fe20Co(20)Ni(14) high-entropy alloy

Probing the Phase Transformation and Dislocation Evolution in Dual-Phase High-Entropy Alloys

Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension

Atomistic Simulation of Deformation Behaviors Polycrystalline CoCrFeMnNi High-Entropy Alloy under Uniaxial Loading

FCC-BCC Phase Transformation Induced Simultaneous Enhancement of Tensile Strength and Ductility at High Strain Rate in High-Entropy Alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Microstructure and Deformation Mechanism of Dual-Phase Al0.5CoCrNiFe High-Entropy Alloy

Modeling and Analysis of Yielding and Strain Hardening in Metastable High‐Entropy Alloys

Cyclic plasticity of an interstitial high-entropy alloy: experiments, crystal plasticity modeling, and simulations

Atomic mechanism of cyclic healing effect in dual-phase metastable high entropy alloy

On the Plastic Deformation Mechanism of Al0.6cocrfeni High Entropy Alloy: In-Situ Ebsd Study and Crystal Plasticity Modeling

Extensive Phase Transformation in an Equiatomic CrCoNi Medium Entropy Alloy under Extreme Uniaxial Tension

Transformation-enhanced Strength and Ductility in a FeCoCrNiMn Dual Phase High-Entropy Alloy

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

The Tension-Compression Asymmetry of Martensite Phase Transformation in a Metastable Fe40Co20Cr20Mn10Ni10 High-Entropy Alloy

Influences Of Strain Rate, Al Concentration And Grain Heterogeneity On Mechanical Behavior Of Conifealxcu1-X High-Entropy Alloys: A Molecular Dynamics Simulation

Deformation mechanisms of CoCrFeMnNi high-entropy alloy under low-cycle-fatigue loading

Deformation Mechanisms and Work-Hardening Behavior of Transformation-Induced Plasticity High Entropy Alloys by in -Situ Neutron Diffraction

Probing deformation behavior of a refractory high-entropy alloy using in situ neutron diffraction