Abstract:Heterostructured high-entropy alloys (HEAs) exhibit a good combination of strength and ductility. However, the deformation mechanisms and related mechanical properties of the heterogeneous nanostructured body-centred cubic (BCC) HEAs remain largely unrevealed. Here, we report the effect of the strain rate on the mechanical properties and microstructural evolution in the heterostructured Al3CoCrCuFeNi HEA with the gradient grain size ranging from 9 nm at the surface to 45 nm in the center using the large-scale atomic simulations. Based on the characterization of microstructure evolution from the atomic simulation, a microstructure-based constitutive model that utilizes a single parameter set is established to study the effects of the multiple strengthening mechanisms at different stages on the strength and strain hardening of the heterostructured HEA under different strain rates. The results show that the plastic deformation mechanisms are strongly influenced by the strain rate in the range of 1 × 106 to 1 × 1010 s−1. The dislocation and deformation twin are the main deformation mechanisms at the strain rate less than 1 × 108 s−1. The deformation twinning cooperated with multiple phase transformations plays a pivotal role at the strain rate of 1 × 109 s−1. The multiple phase transformations are the dominant plastic deformation model at the strain rate of 1 × 1010 s−1, which is different from the classic plastic-deformation mode, including the dislocation and deformation twin in traditional alloys. This phenomenon is ascribed to various types of atomic interactions and atomic-size mismatches, which produce strong lattice distortion. In particular, a large number of edge dislocations are observed, which is extremely different from screw dislocations invariably generated in traditional BCC alloys, and thus, could be responsible for high strength. Furthermore, the stress-strain response of the Al3CoCrCuFeNi HEA is derived from the individual contributions of the lattice distortion, dislocation, grain boundary, deformation twin, phase transformation, and back-stress strengthening mechanisms. The heterogeneous grain boundaries and lattice distortion contribute the most to the yield strength, and the dislocation, deformation twin, phase transformation, and back stress dominate the strain hardening. Therefore, these results highlight a new design strategy of HEAs to tailor their mechanical properties based on the partition of the multistage strengthening mechanisms by the heterostructure.

Unconventional Deformation Behaviours of Nanoscaled High-Entropy Alloys.

Highly Pressurized Helium Nanobubbles Promote Stacking-Fault-mediated Deformation in FeNiCoCr High-Entropy Alloy

Molecular simulation of microstructure evolution and plastic deformation of nanocrystalline CoCrFeMnNi high-entropy alloy under tension and compression

Dynamic deformation behaviors and mechanisms of CoCrFeNi high-entropy alloys

Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension

Anomalous dislocation response to deformation strain in CrFeCoNiPd high-entropy alloys with nanoscale chemical fluctuations

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Stacking fault and transformation-induced plasticity in nanocrystalline high-entropy alloys

Characteristic deformation microstructure evolution and deformation mechanisms in face-centered cubic high/medium entropy alloys

Unique nanostructures and deformation mechanisms in a high-entropy alloy nanolaminates

Local chemical fluctuation mediated ductility in body-centered-cubic high-entropy alloys

Impact of local chemical ordering on deformation mechanisms in single-crystalline CuNiCoFe high-entropy alloys: A molecular dynamics study

Plastic deformation and strengthening mechanism of FCC/HCP nano-laminated dual-phase CoCrFeMnNi high entropy alloy

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys

Nanoscale phase separation in a fcc-based CoCrCuFeNiAl 0.5 high-entropy alloy

High-entropy alloy nanocrystals with low-angle grain boundary for superb plastic deformability and recoverability

In-situ study of room temperature tensile deformation of a CrMnFeCoNi high-entropy alloy

Anomalous size effect on yield strength enabled by compositional heterogeneity in high-entropy alloy nanoparticles

Simultaneously enhancing the tensile strength and ductility of high entropy alloys by nanoscale precipitates/fillers

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy