Abstract:Heterostructured high-entropy alloys (HEAs) exhibit a good combination of strength and ductility. However, the deformation mechanisms and related mechanical properties of the heterogeneous nanostructured body-centred cubic (BCC) HEAs remain largely unrevealed. Here, we report the effect of the strain rate on the mechanical properties and microstructural evolution in the heterostructured Al3CoCrCuFeNi HEA with the gradient grain size ranging from 9 nm at the surface to 45 nm in the center using the large-scale atomic simulations. Based on the characterization of microstructure evolution from the atomic simulation, a microstructure-based constitutive model that utilizes a single parameter set is established to study the effects of the multiple strengthening mechanisms at different stages on the strength and strain hardening of the heterostructured HEA under different strain rates. The results show that the plastic deformation mechanisms are strongly influenced by the strain rate in the range of 1 × 106 to 1 × 1010 s−1. The dislocation and deformation twin are the main deformation mechanisms at the strain rate less than 1 × 108 s−1. The deformation twinning cooperated with multiple phase transformations plays a pivotal role at the strain rate of 1 × 109 s−1. The multiple phase transformations are the dominant plastic deformation model at the strain rate of 1 × 1010 s−1, which is different from the classic plastic-deformation mode, including the dislocation and deformation twin in traditional alloys. This phenomenon is ascribed to various types of atomic interactions and atomic-size mismatches, which produce strong lattice distortion. In particular, a large number of edge dislocations are observed, which is extremely different from screw dislocations invariably generated in traditional BCC alloys, and thus, could be responsible for high strength. Furthermore, the stress-strain response of the Al3CoCrCuFeNi HEA is derived from the individual contributions of the lattice distortion, dislocation, grain boundary, deformation twin, phase transformation, and back-stress strengthening mechanisms. The heterogeneous grain boundaries and lattice distortion contribute the most to the yield strength, and the dislocation, deformation twin, phase transformation, and back stress dominate the strain hardening. Therefore, these results highlight a new design strategy of HEAs to tailor their mechanical properties based on the partition of the multistage strengthening mechanisms by the heterostructure.

Relationship between strength and uniform elongation of metals based on an exponential hardening law

A general physics-based hardening law for single phase metals

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Unveiling the relationship between dislocation structure evolution and strain hardening behavior of S32654 super-austenitic stainless steel

A Constitutive Description of the Yield Strength and Strain Hardening Behaviors of Nano-Twinned Metals

Experimental Characterization and Yield Strength Model for Process-Structure-Property of Selective Laser Melted 316L

Analysis of Ductile Fracture by Extended Unified Strength Theory

High-temperature tensile characteristics and constitutive models of ultrahigh strength steel

Theoretical and Numerical Investigation of the Limit Strain of a 5754-O Aluminum Alloy Sheet Considering the Influence of the Hardening Law

The predicted rate-dependent deformation behaviour and multistage strain hardening in a model heterostructured body-centered cubic high entropy alloy

Modeling of Strain Hardening Behavior and Mechanical Properties of Al 7Si Mg Cast Aluminum Alloys During Tensile Process

Simultaneous enhancement of strength and ductility in a NiCoCrFe high-entropy alloy upon dynamic tension: Micromechanism and constitutive modeling

Strength modeling of sheet metals from shear to plane strain tension

A new constitutive model for high strength structural steels

Correlating Strength and Hardness of High‐Entropy Alloys

A physically-based constitutive model for the prediction of yield strength in the precipitate-hardened high-entropy alloys

Experiments and Model for Serration Statistics in Low-Entropy, Medium-Entropy and High-Entropy Alloys

Dependence of the Representative Strain on the Hardening Functions of Metallic Materials in Indentation

In-situ investigation of strengthening and strain hardening mechanisms of Cu-added medium-Mn steels by synchrotron-based high-energy X-ray diffraction

The Temperature-Dependent Strength of Metals: Theory and Experimental Validation

Strengthening mechanisms of a heterostructured pure aluminum with extraordinary mechanical properties