Abstract:This research characterizes the dynamic hardening behavior of an aluminum alloy sheet of 5182-O for the coupling effect of strain rate and temperature. Tests are carried out for dogbone specimens at different loading conditions to experimentally characterize the strain rate hardening and thermal softening effect for the alloy. The behaviours are then modeled by the Johnson-Cook, Zerilli-Armstrong and Lim-Huh models. In addition, the FEA-friendly polynomial model and artificial neural network (ANN) model are used to describe the highly non-linearity and coupling of strain hardening. Factors affecting ANN predicting accuracy and numerical computing efficiency are comprehensively studied including network structure, parameter settings and optimization algorithms. All the analytical and ANN models are also implemented into ABAQUS/Explicit to numerically compute the reaction force of tensile tests of dogbone specimens. The strain hardening curves are predicted by the analytical and ANN models for the comparison with experimental measurements to evaluate their performance. The experimental results show that the strain rate is slightly negative at room temperature, while the strain rate effect turns to be positive as temperature rises. The comparison of the flow curves between prediction and experiments reveals that the coupling effect is reasonably illustrated by the proposed polynomial model and the ANN model illustrates the flow curves with the dramatically much better accuracy than all the other models. The numerically predicted reaction forces prove that the ANN model accurately illustrates the load capability with the best agreement among the models studied in this research. The numerical computation also shows that the numerical computation efficiency of the ANN model is slightly reduced compared with analytical models, but the reduction is not much and worthwhile compared with the high accuracy of ANN.

Dependence of the Representative Strain on the Hardening Functions of Metallic Materials in Indentation

A further study on representative models for calculating the residual stress based on the instrumented indentation technique

Further Investigation on the Definition of the Representative Strain in Conical Indentation

An Energy-Based Method to Extract Plastic Properties of Metal Materials from Conical Indentation Tests

Theoretical and Numerical Investigation of the Limit Strain of a 5754-O Aluminum Alloy Sheet Considering the Influence of the Hardening Law

Influence of Strain Hardening on the Behavior and Design of Steel Structures

A general physics-based hardening law for single phase metals

Comparative Study and Application of a Coupled Nonlinear Kinematic Hardening Model for Structural Metallic Material Behavior

Constitutive modelling for strain–hardening alloys during isothermal compression: An efficient semi-empirical method coupling the effects of strain, temperature and strain-rate

A general yield function with differential and anisotropic hardening for strength modelling under various stress states with non-associated flow rule

Characterization and modelling of evolving plasticity behaviour up to fracture for FCC and BCC metals

Spherical Indentation into Elastoplastic Materials: Indentation-response Based Definitions of the Representative Strain

Modeling Strain Hardening of Metallic Materials with Sigmoidal Function Considering Temperature and Strain Rate Effects

Characterisation and modelling of anisotropic hardening behaviour of cubic and hexagonal close packed polycrystalline metals

Data-driven estimation of plastic properties in work-hardening model combining power-law and linear hardening using instrumented indentation test

Size-dependent sharp indentation-II: a reverse algorithm to identify plastic properties of metallic materials

A Generally Anisotropic Hardening Model for Big Offset-Strain Yield Stresses

Machine learning-based modeling of the coupling effect of strain rate and temperature on strain hardening for 5182-O aluminum alloy

Relationship between strength and uniform elongation of metals based on an exponential hardening law

Investigation of the residual stress-dependent hardness of amorphous alloys

A novel method to extract the equi-biaxial residual stress and mechanical properties of metal materials by continuous spherical indentation test