Abstract:Abstract Tremendous efforts have been focusing on the improvement of p-type (Bi, Sb)2Te3-based thermoelectric materials for commercial applications. In this study, we achieve versatile interface engineering through a surface decoration of Bi0.5Sb1.5Te3 by amorphous Sb2S3 combining with spark plasma sintering, which introduces semi-coherent Sb/Bi0.5Sb1.5Te3 interfaces and dopes S into Bi0.5Sb1.5Te3. Semi-coherent Sb/Bi0.5Sb1.5Te3 interfaces strongly scatter phonons and lower energy carriers, leading to decreased thermal conductivity and increased Seebeck coefficient, while the electrical conductivity is not sacrificed due to the compromise of the slightly reduced carrier mobility by interfacial scattering and the increased carrier concentration by S doping. Benefited from the decoupled thermoelectric properties, a significantly enhanced power factor of 3345.40 μW m−1 K−2 and a low thermal conductivity of 0.78 W m−1 K−1 is obtained in Bi0.5Sb1.5Te3-0.4%Sb2S3, leading to a high peak zT of ∼ 1.31 at 330 K, which shows a 54% enhancement compared with pristine Bi0.5Sb1.5Te3. Moreover, a conversion efficiency of ∼ 7.6% can be predicted in a single leg Bi0.5Sb1.5Te3-0.4%Sb2S3-based module under a cold side temperature of 300 K and hot side temperature of 480 K. This study paves a facile amorphous Sb2S3 induced interface engineering strategy for the development of high performance (Bi,Sb)2Te3-based thermoelectric materials.

The thermoelectric properties of α-XP (X = Sb and Bi) monolayers from first-principles calculations

High Thermoelectric Performance of a Sc2Si2Te6 Monolayer at Medium Temperatures: an Ab Initio Study.

Penta-PdX2 (X = S, Se, Te) Monolayers: Promising Anisotropic Thermoelectric Materials

First-Principle Calculation of Bi2Te3-Based Thermoelectric Materials

Thermoelectric performance of p-type (Bi,Sb)2Te3 incorporating amorphous Sb2S3 nanospheres

High Thermoelectric Performance of Sb2Si2Te6 Monolayers

Two-dimensional BiSbTeX2 (X = S, Se, Te) and their Janus monolayers as efficient thermoelectric materials

Advances in bismuth-telluride-based thermoelectric devices: progress and challenges

Excellent thermoelectric performance of layered trigonal crystals XPt2Se3 (X = K, Rb)

Thermoelectric Performance of Binary Lithium-Based Compounds: Li3Sb and Li3Bi

Thermoelectric performance of binary lithium-based compounds: Li 3 Sb and Li 3 Bi

Enhanced Thermoelectric Properties Obtained by Compositional Optimization in P -Type Bi X Sb 2− X Te 3 Fabricated by Mechanical Alloying and Spark Plasma Sintering

Compositional engineering of metal-xanthate precursors toward (Bi 1− x Sb x ) 2 S 3 (0 ≤ x ≤ 0.05) films with enhanced room temperature thermoelectric performance

Investigation of the Thermal-to-Electrical Properties of Transition Metal-Sb Alloys Synthesized for Thermoelectric Applications

Intrinsically high thermoelectric performance in near-room-temperature α-MgAgSb materials

Improving Thermoelectric Performance Of Alpha-Mgagsb By Theoretical Band Engineering Design

Thermoelectric performance of (AgBiTe2)1-x(SnTe)x with stable cubic enabled by enhanced configurational entropy

High-Performance p-Type Bi 2 Te 3 -Based Thermoelectric Materials Enabled via Regulating Bi-Te Ratio

Thermoelectric and lattice dynamics properties of layered MX (M = Sn, Pb; X = S, Te) compounds

Enhanced Thermoelectric Performance Of (Sb0.75bi0.25)(2)Te-3 Compound From First-Principles Calculations

Comprehensive Insight into p -Type Bi 2 Te 3 -Based Thermoelectrics near Room Temperature