Abstract:An Atomic Force Microscope (AFM) is a powerful and versatile tool for nanoscale surface studies to capture 3D topography images of samples. However, due to their limited imaging throughput, AFMs have not been widely adopted for large-scale inspection purposes. Researchers have developed high-speed AFM systems to record dynamic process videos in chemical and biological reactions at tens of frames per second, at the cost of a small imaging area of up to several square micrometers. In contrast, inspecting large-scale nanofabricated structures, such as semiconductor wafers, requires nanoscale spatial resolution imaging of a static sample over hundreds of square centimeters with high productivity. Conventional AFMs use a single passive cantilever probe with an optical beam deflection system, which can only collect one pixel at a time during AFM imaging, resulting in low imaging throughput. This work utilizes an array of active cantilevers with embedded piezoresistive sensors and thermomechanical actuators, which allows simultaneous multi-cantilever operation in parallel operation for increased imaging throughput. When combined with large-range nano-positioners and proper control algorithms, each cantilever can be individually controlled to capture multiple AFM images. With data-driven post-processing algorithms, the images can be stitched together, and defect detection can be performed by comparing them to the desired geometry. This paper introduces principles of the custom AFM using the active cantilever arrays, followed by a discussion on practical experiment considerations for inspection applications. Selected example images of silicon calibration grating, highly-oriented pyrolytic graphite, and extreme ultraviolet lithography masks are captured using an array of four active cantilevers ("Quattro") with a 125 µm tip separation distance. With more engineering integration, this high-throughput, large-scale imaging tool can provide 3D metrological data for extreme ultraviolet (EUV) masks, chemical mechanical planarization (CMP) inspection, failure analysis, displays, thin-film step measurements, roughness measurement dies, and laser-engraved dry gas seal grooves.

Scanning probe arrays for life sciences and nanobiology applications

Parallel-scan Based Microarray Imager Capable of Simultaneous Surface Plasmon Resonance and Hyperspectral Fluorescence Imaging

Silicon Nitride Cantilever Arrays Integrated with Si Heater and Piezoelectric Sensors for SPM Data Storage Applications

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Scanning diamond NV center probes compatible with conventional AFM technology

Silicon microresonator arrays: A comprehensive study on fabrication techniques and pH-controlled stress-induced variations in cantilever stiffness

Compound Three-dimensional Piezoelectric Scanner Used in Scanning Probe Microscopy

Identification of nanoparticles and nanosystems in biological matrices with scanning probe microscopy

Microvolume field-effect pH sensor for the scanning probe microscope

Ultrathin, Dual-Sided Silicon Neural Microprobes Realized Using Bcb Bonding And Aluminum Sacrificial Etching

Very high frequency probes for atomic force microscopy with silicon optomechanics

Probe-Type Microforce Sensor for Mirco/Nano Experimental Mechanics

Advanced scanning probe lithography

A Novel Micro-cantilever Array Immunosensor Based on Piezoelectric Scanning

Three-dimensional, Flexible Nanoscale Field-Effect Transistors As Localized Bioprobes.

Arrays of Nano-Electromechanical Biosensors Functionalized by Microcontact Printing

Intracortical Probe Arrays with Silicon Backbone and Microelectrodes on Thin Polyimide Wings Enable Long-Term Stable Recordings in Vivo

Active Probe Atomic Force Microscopy with Quattro-Parallel Cantilever Arrays for High-Throughput Large-Scale Sample Inspection

Biointerface design for vertical nanoprobes

Probing Local Electromechanical Effects in Highly Conductive Electrolytes.

Beam Pen Lithography.