Abstract:The suboptimal cooling efficiency of solar PV panels stands as a significant bottleneck affecting their electrical performance. The concept of a bi-fluid photovoltaic thermal (BFPVT) system based on the usage of double exchangers cooling with simultaneously using two types of coolants recently offers a promising strategy for the multiplication of the electrical and thermal performances of PVT systems. Hence, this study presents a detailed 3-D numerical investigation and comparative performance analysis on a BFPVT based on the simultaneous cooling with both natural air and water/TiO 2 nanofluid under two structures of cooling channels (finned and non-finned configurations). A parametric analysis is conducted to assess the impact of varying concentrations of TiO 2 nanoparticles (ranging from 0.0 to 1.0 %) to determine the optimal concentration of TiO 2 –water nanofluids that yield the highest cooling rates and thermal efficiency in BFPVT collectors. In addition, an energic analysis of the simulated BFPVT systems is developed to determine the average daily thermal efficiency and nano-bifluid temperature rise under the investigated configurations. The results indicated that as the concentration of TiO 2 –water nanofluid increases, both the water outlet temperature and air outlet temperature also rise, thus remarkably improve the cooling rates and thermal efficiency of the proposed BFPVT system. Moreover, it is optimistically revealed the BFPVT configuration with 1.0 % TiO 2 nanoparticle concentration and eight parallel longitudinal fins outperformed the BFPVT performance amongst the investigated configurations. At these conditions, the peak hourly thermal efficiency of the air and TiO 2 –water BFPVT for the finned and non-finned configurations are estimated as 78.6 % and 70.8 %, respectively, at a continuous TiO 2 –water flow at a rate of 0.015 kg/s, along with a concurrent airflow. Moreover, the mean daily thermal efficiency is computed as 56.3 % and 50.4 % for the finned and non-finned configurations at the same optimal conditions.

Numerical investigation on the performance and environmental aspect of roll bond photovoltaic thermal unit condenser incorporating fins on the absorber

Numerical auxiliary study of charge-air cooler design

Numerical analysis of Roll Bond Photovoltaic Thermal working as a condenser during nighttime

Numerical study on the performance of photovoltaic thermal unit condenser with water/nanofluids as fluids medium

Numerical investigation of thermal management performances in a solar photovoltaic system by using the phase change material coupled with bifurcated fractal fins

Efficiency upgrading of solar PVT finned hybrid system in Bangladesh: Flow rate and temperature influences

Numerical analysis and design of a novel solar photovoltaic thermal system using finned cooling channel structures embedded with air/TiO 2 –water nano bi-fluid

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Experimental and economic evaluation on the performance improvement of a solar photovoltaic thermal system with skeleton-shaped fins

Numerical Investigation of Performance Enhancement for Thermoelectric Generator System Optimization of HX Fin Shape

Three-dimensional shape optimization of fins for application in compact supercritical CO 2 solar receivers

Performance Assessment and Improvement of Photovoltaic-Thermal System based on Energy, Exergy, Economic and Environment Analysis

Assessment of photovoltaic power generation using fin augmented passive cooling technique for different climates

Enhancing Heat Transfer of Photovoltaic Panels with Fins

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Two-phase flow investigation in channel design of the roll-bond cooling component for solar assisted PVT heat pump application

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Numerical study of phase change material partitioned cavities coupled with fins for thermal management of photovoltaic cells

Convective-radiative fins with simultaneous variation of thermal conductivity, heat transfer coefficient, and surface emissivity with temperature

Thermal management enhancement of photovoltaic panels using phase change material heat sinks with various T-shaped fins

Theoretical study on the heat transfer characteristics of a plain fin in the finned-tube evaporator assisted by solar energy