Abstract:This study presents a numerical analysis of the energy efficiency for a novel solar PVT Loop Heat Pipe (PVT-LHP) employing a novel Micro-channel evaporator and a novel PCM heat storage exchanger. It presents a description of the different sub-models in the PVT-LHP system (the PVT model, the microchannel heat collector model and the novel PCM triple heat exchanger model) and the integrated model of the system. The integrated model of the system was solved by ensuring a heat balance at the condenser and the evaporator. A parametric analysis has been performed in order to assess the influence of the environmental parameters (i.e. solar radiation, air temperature, wind velocity), structural parameters (i.e. glazing cover, the number of absorbing microchannel heat pipes, PV cell packing factor), the circulating fluid variables (i.e. cold-water inlet temperature and water mass flow rate) on the energy performance of the system. The novel PVT-LHP has been compared with a conventional Solar PVT-LHP system. It was found that lower solar radiation, lower ambient air temperature, higher wind speed, higher packing factor, lower cold-water inlet temperature and a smaller cover number led to an enhanced electrical efficiency, but a reduced thermal efficiency of the module; whereas a higher cold-water mass flow rate and a greater number of microchannel heat pipes gave rise to both thermal and electrical efficiencies of the module. It was also found that an increase of solar radiation, ambient temperature, cover number, microchannel heat pipe number and packing factor are favourable factors for the overall COP (Coefficient Of Performance) of the system, whereas an increase of wind velocity and cold water mass flow rate are unfavourable. The study indicated the existence of an optimal cover number, number of microchannel heat pipes and mass flowrate. Under the given design conditions, the electrical, thermal and overall efficiency of the PV/LHP module were 12.2%, 55.6% and 67.8% respectively and the novel system can achieve 28% higher overall energy efficiency and 2.2 times higher COP compared to a conventional system. The integrated computer model developed in this study can be used to design and optimize the novel PVT-LHP heating system.

Numerical analysis of Roll Bond Photovoltaic Thermal working as a condenser during nighttime

Numerical investigation on the performance and environmental aspect of roll bond photovoltaic thermal unit condenser incorporating fins on the absorber

Two-phase flow investigation in channel design of the roll-bond cooling component for solar assisted PVT heat pump application

Prospective Study of a Novel Heat Pump System with Solar Energy Spectral Beam Splitting

A Hybrid Parabolic Trough Solar Collector System Integrated with Photovoltaics

Numerical investigation on the performance characteristics of photovoltaic thermal refrigerator integrating phase change material and water/nanofluid as fluid medium

Integrate of night radiative cooling technology using a photovoltaic thermal collector under three different climates

Numerical and Parametric Analysis for Enhancing Performances of Water Photovoltaic/Thermal System

Thermal evaluation of photovoltaic panels combined pulsating heat pipe with phase change materials: numerical study and experimental validation

Photovoltaic Thermal Heat Pump Assessment for Power and Domestic Hot Water Generation

Performance Assessment and Improvement of Photovoltaic-Thermal System based on Energy, Exergy, Economic and Environment Analysis

A comparative performance evaluation and sensitivity analysis of a photovoltaic-thermal system with radiative cooling

Theoretical analysis on efficiency factor of direct expansion PVT module for heat pump application

Numerical investigation of PVT coverage on an integrated building-solar-heat pump system: Technical and economic study

The performance optimization of DX-PVT heat pump system for residential heating

Field experimental investigation on electricity and thermal performances of a large scale photovoltaic solar-thermal direct expansion heat pump system

Analysis of night behavior and negative running for PVT system

THE NUMERICAL SIMULATION BASE ON A DYNAMIC AND DISTRIBUTED MODEL FOR A PHOTOVOLTAIC SOLAR ASSISTED HEAT PUMP

Energy Performance Analysis of a Novel Solar PVT Loop Heat Pipe Employing a Microchannel Heat Pipe Evaporator and a PCM Triple Heat Exchanger

Performance Analysis of a Photovoltaic Heat Pump

Experimental evaluation of photovoltaic thermal (PVT) system using a modular heat collector with flat back shape fins, pipe, nanofluids and phase change material