Abstract:This study describes the outdoor experiments conducted on a photovoltaic/thermal (PV/T) system during the summer months of May and June in the year 2023, in northern India. The main goal of this paper is to reduce the temperature of a photovoltaic (PV) module for effective thermal regulation by implementing a hybrid cooling strategy in a PV/T system. This is achieved by integrating two techniques: multi-walled carbon nanotubes (MWCNT)-water nanofluid as the working fluid for active cooling and paraffin wax as the phase change material (PCM) for passive cooling. Therefore, the present study aims to design, fabricate, and test an innovative thermal collector with a multi-block finned absorber plate positioned beneath the PV module to promote uniform heat transfer distribution and mitigate temperature stratification within each PCM block. The proposed PV/T-PCM system's performance is assessed from energetic, exergetic, economic, and environmental standpoints compared to the PV/T system and conventional PV module. The present study also examines the impact of different concentrations (0.1–0.2 %) of MWCNT and volumetric flow rates (0.5–1.5 l/min) of both water and nanofluids as heat transfer fluids. It is shown that a desirable flow rate of 1.5 l/min yields the most favorable outcomes. The PV/T-PCM (0.2 %) system has been found to exhibit the highest levels of energetic and exergetic electrical and thermal efficiencies, with reported values of 13.25 %, 65 %, 12.81 %, and 1.66 %, respectively. The economic assessment demonstrates that the proposed PV/T-PCM system, integrating water and nanofluid, results in cost savings of 17.41 % and 19.63 % compared to a traditional uncooled PV system. In the context of environmental sustainability, the highest net CO 2 mitigation is estimated to be 18.01 tons for the nanofluid-based PV/T-PCM system. Thus, the results confirm that the proposed PV/T-PCM (0.2 %) system, incorporating a hybrid cooling technique, achieves optimal performance.

Numerical investigation on the performance characteristics of photovoltaic thermal refrigerator integrating phase change material and water/nanofluid as fluid medium

Numerical Simulation on the Thermal Performance of a PCM-containing Ventilation System with a Continuous Change in Inlet Air Temperature

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Performance enhancement of nanofluid-based photovoltaic/thermal system with a novel finned multi-block container of phase change material in the summer season of northern India

Parametric investigation of photovoltaic-thermal systems integrated with porous phase change material

Numerical study on the performance of a glazed photovoltaic thermal system integrated with phase change material (GPVT/PCM): on the contribution of PCM volumetric fraction and environmental temperature

Numerical study on the performance of photovoltaic thermal unit condenser with water/nanofluids as fluids medium

Critical analysis of enhanced photovoltaic thermal systems: a comparative experimental study of PCM, TEG, and nanofluid applications

Investigation on Thermal and Electrical Performance of Late-Model Plate-and-Tube in Water-Based PVT-PCM Collectors

Operational and structural parametric analysis of a photovoltaic/thermal system integrated with phase change material

Techno-economic evaluation of photovoltaic thermal system integrated with porous phase change materials: Case studies in China

Heat transfer and energy performance analysis of photovoltaic thermal system using functionalized carbon nanotubes enhanced phase change material

Effect of varying the thermophysical properties of phase change material on the performance of photovoltaic/thermal-PCM hybrid module numerically

Electrical and thermal performance assessment of photovoltaic thermal system integrated with organic phase change material

Experimental evaluation of photovoltaic thermal (PVT) system using a modular heat collector with flat back shape fins, pipe, nanofluids and phase change material

Numerical analysis and optimization of a novel photovoltaic thermal solar unit improved by Nano-PCM as an energy storage media and finned collector

Numerical investigation of thermal management performances in a solar photovoltaic system by using the phase change material coupled with bifurcated fractal fins

Thermal evaluation of photovoltaic panels combined pulsating heat pipe with phase change materials: numerical study and experimental validation

Experimental investigations on unglazed photovoltaic-thermal (PVT) system using water and nanofluid cooling medium

Numerical investigation of the effect of operating conditions on performance of PV-PCM system

Simulation of solar thermal panel systems with nanofluid flow and PCM for energy consumption management of buildings