Numerical investigation of the effect of operating conditions on performance of PV-PCM system

Prem Kumar Chaurasiya,Mohammed Anees Sheik,Upendra Rajak,Tikendra Nath Verma,Vikas Pandey

DOI: https://doi.org/10.1177/09544089241257340

2024-06-05

Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering

Abstract:Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Ahead of Print. The photovoltaic module only manages to convert around 15% of the incoming light into usable electricity and the rest is lost as heat, reducing the module's overall efficiency. Hybrid photovoltaic thermal systems are therefore the best way to collect thermal and electrical energy. The cooling and heat storage benefits of PV cells are amplified using phase change materials (PCMs). In this article, a simple two-dimensional CFD model to forecast the temperature of the PV where it contacts the PCM. The findings of the numerical simulations show that PV systems equipped with PCM have been studied under a variety of situations. A contemporary thermodynamic study is performed to examine system behaviour under different operating settings by investigating the effect of some rather crucial aspects that have not been taken into account before. The research takes into account three instances, each with its own unique combination of wind speed, ambient temperature, and sun irradiation. It has been shown that the solar radiation is a key component for growth in the PV temperature. The findings show that an increase in PV temperature of 5–7°C is caused by an increase in solar irradiance of 1000 W/m2. The rise in wind velocity, heat dissipation rate increases resulting to the fall in the temperature of the PCM and glass, the decrease in PCM temperature leads to a further drop in glass temperature. More so than wind speed or solar irradiation, ambient temperature determines how quickly PV glass heats up. Furthermore, at an ambient temperature of 35°C, PCM is found to melt entirely in 435 min, whereas at an ambient temperature of 30°C, PCM melts up to a liquid fraction of 0.77 min. Therefore, the efficiency of the PV system improves dramatically as the outside temperature is lowered.

engineering, mechanical