Abstract:Lithium-excess layered oxide (LLO) cathode materials offer hope for lithium-ion batteries with energy densities exceeding 400 Wh kg–1. However, their practical applications have long been hindered by chemical and structural instabilities both in the bulk and at the electrode–electrolyte interface. Here, we report a room-temperature coating method based on the molecular self-assembly of metal precursors guided by the high density of OH groups on a thin, surface-adherent polydopamine (PDA) film deposited on LLO particles. In particular, a nanoscale Zr(OH)4 surface coating significantly improved the cycle performance of a high-capacity LLO cathode (∼300 mAh g–1), which retained more than 82.3% of the initial capacity after 150 charge–discharge cycles (vs 53.7% for the bare LLO). This coating method may be applied to stabilizing other battery cathode materials with aggressive chemistries or operating in extreme potentials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00975?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00975</a>.Experimental methods; SEM images of the Zr(OH)4-coated sample (without the GSA process); bare and PDA-treated samples; additional TEM images; EDS results of the selected area of Zr(OH)4; EDS mapping of Al(OH)3, Si(OH)4, and Ti(OH)4 coated LLOs; electrochemical performance of the bare LLO and Zr(OH)4-, Al(OH)3-, Si(OH)4-, and Ti(OH)4-coated LLOs; and additional tables (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00975/suppl_file/ae1c00975_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Li4Ti5O12 coated with ultrathin aluminum-doped zinc oxide films as an anode material for lithium-ion batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Lithium Cobalt Oxides Functionalized by Conductive Al-doped ZnO Coating As Cathode for High-performance Lithium Ion Batteries

Highly-Stable Li₄Ti₅O12 Anodes Obtained by Atomic-Layer-Deposited Al₂O₃

Ultrathin Titanium Dioxide Coating Enables High-Rate and Long-Life Lithium Cobalt Oxide

Zr-doped Li4Ti5O12 Anode Materials with High Specific Capacity for Lithium-Ion Batteries

Ultrathin ZnO Coating for Improved Electrochemical Performance of LiNi0.5Co0.2Mn0.3O2 Cathode Material

Atomic Layer Deposition of Aluminum-Doped Zinc Oxide Onto MoO3 Nanorods Toward Enhanced Lithium Storage Performance

Al2O3 Coating on BaLi2Ti6O14 Surface to Boost Its Stability and Rate Performance

LiTiO2 coating toward enhanced nickel-rich LiNi0.815Co0.15Al0.035O2 cathode in lithium-ion batteries

Li 1.4 Al 0.4 Ti 1.6 (PO 4 ) 3 -Modified Li 4 Ti 5 O 12 Anode for Lithium-Ion Storage with Enhanced Rate and Cycling Performance

Freeze-drying synthesis of metal element (Zr, Cr, Co)–doped Li4Ti5O12 anode material for enhanced electrochemical energy storage in lithium-ion batteries

Atomic Layer Deposition of ZnO/TiO2 Nanolaminates As Ultra-Long Life Anode Material for Lithium-Ion Batteries

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

Passivating the Surface of Li-Excess Layered Oxide Cathode Materials through Guided Self-Assembly of Metal Hydroxide Thin Films

Atomic layer deposition of aluminum-doped zinc oxide onto MoO 3 nanorods toward enhanced lithium storage performance

Suppression of Interfacial Reactions Between Li4Ti5O12 Electrode and Electrolyte Solution Via Zinc Oxide Coating

Coating effect of Al2O3 on ZnMn2O4 anode surface for lithium-ion batteries

Simply AlF3-treated Li4Ti5O12 composite anode materials for stable and ultrahigh power lithium-ion batteries