Abstract:Lithium-excess layered oxide (LLO) cathode materials offer hope for lithium-ion batteries with energy densities exceeding 400 Wh kg–1. However, their practical applications have long been hindered by chemical and structural instabilities both in the bulk and at the electrode–electrolyte interface. Here, we report a room-temperature coating method based on the molecular self-assembly of metal precursors guided by the high density of OH groups on a thin, surface-adherent polydopamine (PDA) film deposited on LLO particles. In particular, a nanoscale Zr(OH)4 surface coating significantly improved the cycle performance of a high-capacity LLO cathode (∼300 mAh g–1), which retained more than 82.3% of the initial capacity after 150 charge–discharge cycles (vs 53.7% for the bare LLO). This coating method may be applied to stabilizing other battery cathode materials with aggressive chemistries or operating in extreme potentials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00975?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00975</a>.Experimental methods; SEM images of the Zr(OH)4-coated sample (without the GSA process); bare and PDA-treated samples; additional TEM images; EDS results of the selected area of Zr(OH)4; EDS mapping of Al(OH)3, Si(OH)4, and Ti(OH)4 coated LLOs; electrochemical performance of the bare LLO and Zr(OH)4-, Al(OH)3-, Si(OH)4-, and Ti(OH)4-coated LLOs; and additional tables (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00975/suppl_file/ae1c00975_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Suppression of Interfacial Reactions Between Li4Ti5O12 Electrode and Electrolyte Solution Via Zinc Oxide Coating

Gassing in Li(4)Ti(5)O(12)-based Batteries and Its Remedy.

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor

Carbon coating to suppress the reduction decomposition of electrolyte on the Li 4Ti 5O 12 electrode

Li4Ti5O12 coated with ultrathin aluminum-doped zinc oxide films as an anode material for lithium-ion batteries

Enhanced Cycling Stability of Microsized Licoo2 Cathode by Li4ti5o12 Coating for Lithium Ion Battery

Unveiling the Synergic Roles of Mg/Zr Co-Doping on Rate Capability and Cycling Stability of Li4Ti5O12

Interfacial Effects On Lithium Superoxide Disproportionation In Li-O-2 Batteries

Effect of TiC surface oxide overlayer on the control of Li O behavior in lithium-oxygen batteries: Implications for cathode catalyst design

Understanding the role of TiO2 coating for stabilizing 4.6V high-voltage LiCoO2 cathode materials

In Situ Formed Surface Layer to Improve the Air Stability of LLZTO and Its Contact with the Li Metal

Synthesis of Highly Stable LTO/rGO/SnO2 Nanocomposite via In Situ Electrostatic Self‐Assembly for High‐performance Lithium‐Ion Batteries

Effect of ZnO modification on the performance of LiNi0.5Co0.25Mn0.25O2 cathode material

Li7La3Zr2O12-co-LiNbO3 Surface Modification Improves the Interface Stability between Cathode and Sulfide Solid-State Electrolyte in All-Solid-State Batteries

Achieving Efficient and Stable Interface Between Metallic Lithium and Garnet-Type Solid Electrolyte Through a Thin Indium Tin Oxide Interlayer

A Simple and Efficient Strategy for Ameliorating Li/LLZO Interfacial Contact

Effect of solid electrolyte interface (SEI) film on cyclic performance of Li4Ti5O12 anodes for Li ion batteries

Passivating the Surface of Li-Excess Layered Oxide Cathode Materials through Guided Self-Assembly of Metal Hydroxide Thin Films

Growth Process and Removal of Interface Contaminants for Garnet-Based Solid-State Lithium Metal Batteries

Improving the stability, lithium diffusion dynamics, and specific capacity of SrLi2Ti6O14 via ZrO2 coating

Reducing Gases Triggered Cathode Surface Reconstruction for Stable Cathode‐Electrolyte Interface in Practical All‐Solid‐State Lithium Batteries