Abstract:A surface‐to‐bulk modification with Li2TiO3 coating and gradient Ti doping is demonstrated to solve the deterioration of LiCoO2 at high voltage. The synergetic modification enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. Elevating the charging cut‐off voltage is an effective strategy to increase the energy density of LiCoO2. However, unstable interfacial structures and unfavorable phase transitions in bulk are inevitably triggered during deep de‐lithiation at high voltage. Herein, an integrated surface‐to‐bulk Ti‐modification strategy is applied to LiCoO2, enabling uniform Li2TiO3 coating on the surface and gradient Ti‐doping toward the structural bulk. The resultant Ti‐modified LiCoO2 (T‐LCO) electrode can be stably cycled up to 4.6 V, providing a high‐rate capability of 137 mAh g−1 at 5C and a long‐life stability with 80.5% capacity retention after 400 cycles at 1C, far outperforming the unmodified LiCoO2 electrode with only 50.7% capacity retention. In situ X‐ray diffraction characterization and density functional theory calculation reveal that the synergistic modification of T‐LCO enhances Li+ diffusion, facilitates the construction of high‐quality cathode/electrolyte interphase, reduces the phase transition from O3 to H1‐3 and Co3d/O2p band overlap, and restrains layer‐to‐spinel phase distortion, thus improving structural stability at 4.6 V. This work presents a "two birds one step" strategy to enhance the cycling stability and achievable capacity of high‐voltage LiCoO2 for developing high energy density lithium‐ion batteries.

Improving the stability, lithium diffusion dynamics, and specific capacity of SrLi2Ti6O14 via ZrO2 coating

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Unveiling the Synergic Roles of Mg/Zr Co-Doping on Rate Capability and Cycling Stability of Li4Ti5O12

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Zr-doped Li4Ti5O12 Anode Materials with High Specific Capacity for Lithium-Ion Batteries

Al2O3 Coating on BaLi2Ti6O14 Surface to Boost Its Stability and Rate Performance

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor

Enhanced lithium storage properties of SrLi2Ti6O14 anode by Na2MoO4 surface modification

Enhanced electrochemical properties and thermal stability of Zr4+ doped Li1.20Mn0.54Ni0.13Co0.13O2 cathode material by a Li ion conductor of Li3PO4 surface coating

Li2O-2B2O3 coating decorated Li4Ti5O12 anode for enhanced rate capability and cycling stability in lithium-ion batteries

Enhanced Cycling Stability of Microsized Licoo2 Cathode by Li4ti5o12 Coating for Lithium Ion Battery

Stabilizing 4.6 V LiCoO2 via Surface‐to‐Bulk Titanium Modification

Feasibility to Improve the Stability of Lithium-Rich Layered Oxides by Surface Doping

Effects of SrO/Li_2O/La_2O_3/Ta_2O_5/TiO_2-coating on Electrochemical Performance of LiCoO_2

Enhanced cycle stability of LiCoO2 at high voltage by mixed conductive Li7.5La3Zr1.5Co0.5O12 coating

Suppression of Interfacial Reactions Between Li4Ti5O12 Electrode and Electrolyte Solution Via Zinc Oxide Coating

Channelization of cathode/electrolyte interphase to enhance the rate-capability of LiCoO2

Synthesis of Zr Doped Li4ti5o12 by A High-Energy Ball-Milling Modified Solid-State Method

Zirconium(IV) Doping Enlarging Lithium-Ion Diffusion Channel of Lithium-Rich Li 2.24 SrTi 6 O 14 Anode Material for High-Rate Lithium-Ion Batteries

Simultaneously Constructing a TiO2–LiF Composite Coating Enhancing the Cycling Stability of LiCoO2 at 4.6 V High Voltage

Enhanced Cathode Performance: The Heterostructure Construction of LiCoO 2 @Co 3 O 4 @Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12