Abstract:LNMO (LiNi0.5Mn1.5O4-δ) is a high-energy density positive electrode material for lithium ion batteries. Unfortunately, it suffers from capacity loss and impedance rise during cycling due to electrolyte oxidation and electrode/electrolyte interface instabilities at high operating voltages. Here, a solution-gel synthesis route was used to coat 0.5-2.5 μm LNMO particles with amorphous Li-Ti-O (LTO) for improved Li conduction, surface structural stability and cyclability. High-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) analysis coupled with energy dispersive X-ray (EDX) showed Ti-rich amorphous coatings/islands or Ti-rich spinel layers on many of the LTO-modified LNMO facets, with a thickness varying from about 1 to 10 nm. The surface modification in the form of amorphous islands was mostly possible on high-energy crystal facets. Physicochemical observations were used to propose a molecular mechanism for the surface modification, combining insights from metalorganic chemistry with the crystallographic properties of LNMO. The improvements in functional properties were investigated in half cells. The cell impedance increased faster for the bare LNMO compared to amorphous LTO modified LNMO, resulting in Rct values as high as 1247 Ω (after 1000 cycles) for bare LNMO, against 216 Ω for the modified material. At 10C, the modified material boosted a 15% increase in average discharge capacity. The improvements in electrochemical performance were attributed to the increase in electrochemically active surface area, as well as to improved HF-scavenging, resulting in the formation of protective byproducts, generating a more stable interface during prolonged cycling.

Enhanced lithium storage properties of SrLi2Ti6O14 anode by Na2MoO4 surface modification

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

Boosting the electrochemical performance of MoO 3 anode for long-life lithium ion batteries: Dominated by an ultrathin TiO 2 passivation layer

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Enabling improved lithium storage properties of novel LiNbMoO6 anode through co-modification by uniform Li2SiO3 thin film and oxygen vacancies

Enhancement of LiNi0.5Mn1.5O4 Cathode Materials Through Interfacial Modification of Amorphous Al2O3 in Lithium Ion Batteries

Enhancing the Electrochemical Performance of High Voltage LiNi0.5Mn1.5O4 Cathode Materials by Surface Modification with Li1.3Al0.3Ti1.7(PO4)3/C

Nanostructured Sn–Mo multilayer film anode with stable electrode-interfaces for long-cycle lithium storage

Synthesis and Electrochemical Performance of Defected Nano-Micro Structure Sodium/lithium Titanate Composites Materials for Lithium-Ion Batteries

Enhancing Electrochemical Performance of LiNi0.6Co0.2Mn0.2O2 by Lithium-ion Conductor Surface Modification

Enhanced Electrochemical Performance of Li1.2[Mn0.54Co0.13Ni0.13]O2 Enabled by Synergistic Effect of Li1.5Na0.5SiO3 Modification

Significant Enhancement of the Capacity and Cycling Stability of Lithium-Rich Manganese-Based Layered Cathode Materials via Molybdenum Surface Modification

Li2TiO3 and Li2ZrO3 Co-Modification LiNi0.8Co0.1Mn0.1O2 Cathode Material with Improved High-Voltage Cycling Performance for Lithium-Ion Batteries

Solution-gel-based surface modification of LiNi0.5Mn1.5O4- δ with amorphous Li-Ti-O coating

Nanoscale Manipulation of Spinel Lithium Nickel Manganese Oxide Surface by Multisite Ti Occupation As High‐Performance Cathode

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

Sr-Based Sub/Surface Integrated Layer and Bulk Doping to Enhance High-Voltage Cycling of a Ni-Rich Cathode Material

Boosting Li-Ion Diffusion Kinetics of Na 2 Ti 6– x Mo x O 13 via Coherent Dimensional Engineering and Lattice Tailoring: An Alternative High-Rate Anode

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material

Improvement of Lithium Storage Performance of Molybdenum Trioxide by A Synergistic Effect of Surface Coating and Oxygen Vacancies

Enhanced structurally stable cathodes by surface and grain boundary tailoring of Ni-Rich material with molybdenum trioxide