Abstract:The most popular anode material in commercial Li-ion batteries is still graphite. However, its low intercalation potential is close to that of lithium, which results in the dendritic growth of lithium at its surface, and the formation of a passivation film that limits the rate capability and may result in safety hazards. High-performance anodes are thus needed. In this context, lithium titanite oxide (LTO) has attracted attention as this anode material has important advantages. Due to its higher lithium intercalation potential (1.55 V vs. Li+/Li), the dendritic deposition of lithium is avoided, and the safety is increased. In addition, LTO is a zero-strain material, as the volume change upon lithiation-delithiation is negligible, which increases the cycle life of the battery. Finally, the diffusion coefficient of Li+ in LTO (2 × 10−8 cm2 s−1) is larger than in graphite, which, added to the fact that the dendritic effect is avoided, increases importantly the rate capability. The LTO anode has two drawbacks. The energy density of the cells equipped with LTO anode is lower compared with the same cells with graphite anode, because the capacity of LTO is limited to 175 mAh g−1, and because of the higher redox potential. The main drawback, however, is the low electrical conductivity (10−13 S cm−1) and ionic conductivity (10−13–10−9 cm2 s−1). Different strategies have been used to address this drawback: nano-structuration of LTO to reduce the path of Li+ ions and electrons inside LTO, ion doping, and incorporation of conductive nanomaterials. The synthesis of LTO with the appropriate structure and the optimized doping and the synthesis of composites incorporating conductive materials is thus the key to achieving high-rate capability. That is why a variety of synthesis recipes have been published on the LTO-based anodes. The progress in the synthesis of LTO-based anodes in recent years is such that LTO is now considered a substitute for graphite in lithium-ion batteries for many applications, including electric cars and energy storage to solve intermittence problems of wind mills and photovoltaic plants. In this review, we examine the different techniques performed to fabricate LTO nanostructures. Details of the synthesis recipes and their relation to electrochemical performance are reported, allowing the extraction of the most powerful synthesis processes in relation to the recent experimental results.

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

High Rate Li4Ti5O12–Fe2O3 and Li4Ti5O12–CuO Composite Anodes for Advanced Lithium Ion Batteries

Nanocomposites As Anode for Lithium-Ion Battery

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Synthesis and electrochemical performance of nanoporous Li4Ti5O12 anode material for lithium-ion batteries

Structure and Electrochemical Properties of Spinel Li4ti5o12 Nanocomposites As Anode for Lithium-Ion Battery

Facile fabrication of Li5Cr7Ti6O25@Li0.33La0.56TiO3 composites as promising anode materials for high-performance Li-ion batteries

Electrochemical performance of Li4Ti5O12 anode materials synthesized using a spray-drying method

Investigation on process mechanism of a novel energy-saving synthesis for high performance Li4Ti5O12 anode material

Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Nano-structure and characterization of carbon composite with Al3+ and Mn4+ co-doped Li4Ti5O12 as anodes for Li-ion batteries

Liquid metal modified Li4Ti5O12 with improved conductivity as novel anode material for lithium-ion batteries

Monodispersed mesoporous Li4Ti5O12 submicrospheres as anode materials for lithium-ion batteries: morphology and electrochemical performances.

Self-assembled Li4Ti5O12/rGO nanocomposite anode for high power lithium-ion batteries

Oxalic acid-assisted preparation of LTO-carbon composite anode material for lithium-ion batteries

Simply AlF3-treated Li4Ti5O12 composite anode materials for stable and ultrahigh power lithium-ion batteries

Facile synthesis of nanostructured Li4Ti5O12/PEDOT:PSS composite as anode material for lithium-ion batteries

Improved Electrochemical Properties of Li 4 Ti 5 O 12 Nanopowders (NPs) via Addition of LiAlO 2 and Li 6 SiON Polymer Electrolytes, Derived from Agricultural Waste

Synthesis and Electrochemical Performance of Li4Ti5O12 Submicrospheres Coated with TiN As Anode Materials for Lithium-Ion Battery

Low-cost and Environmentally Friendly Synthesis of an Al3+and Mn4+co-doped Li4Ti5O12composite with Carbon Quantum Dots As an Anode for Lithium-Ion Batteries