Abstract:Doping, incorporating a conductive phase and reducing the particle size are three strategies for improving the rate capability of Li4Ti5O12 (LTO). Thus, the synergistic employment of these three strategies is expected to more efficiently improve the rate capability. To achieve this goal, Fe2+ doped LTO/multiwall carbon nanotube (MWCNT) composites were prepared by post-mixing MWCNTs with Fe2+ doped LTO particles from a solid-state reaction, while Cr3+ doped LTO/MWCNT composites were fabricated by a facile one-step solid-reaction using MWCNT premixing. Fe2+/Cr3+ doping not only remarkably improves the electronic conductivity and Li+ ion diffusion coefficient in LTO but also lowers its working potential. The carbon existed in the material fabrication processes leads to the reduction of the particle size. The introduction of MWCNTs in the Fe2+/Cr3+ doped LTO/MWCNT composite significantly enhances the electrical conduction between Fe2+/Cr3+ doped LTO particles. As a result of this novel synergistic strategy, performances of Li3.8Fe0.3Ti4.9O12/MWCNT and LiCrTiO4/MWCNT composites are comprehensively improved. The Li3.8Fe0.3Ti4.9O12/MWCNT composite shows a working potential of 8.9 mV lower than that of pristine LTO. At 10 C, its capacity is up to 106 mA h g(-1) with an unexpected capacity retention of 117% after 200 cycles in a potential window of 1.0-2.5 V (vs. Li/Li+). The corresponding values for LiCrTiO4/MWCNT composites are 46.2 mV, 120 mA h g(-1) and 95.9%. In sharp contrast, the pristine counterpart shows a very disappointing capacity of only 11 mA h g(-1) at 10 C. Therefore, the novel Li3.8Fe0.3Ti4.9O12/MWCNT and LiCrTiO4/MWCNT composites possess great potential for applications in high-power lithium-ion batteries.

High Rate Li4Ti5O12–Fe2O3 and Li4Ti5O12–CuO Composite Anodes for Advanced Lithium Ion Batteries

Scalable Synthesis of Fe3O4/C Composites with Enhanced Electrochemical Performance As Anode Materials for Lithium-Ion Batteries

The high-rate performance of the newly designed Li4Ti5O12/Cu composite anode for lithium ion batteries

Li4Ti5O12/TiO2 composite as anode materials for lithium ion battery

Synergistic effect of tailored 3D/2D Ti3C2Tx/CoS2/C nanostructured composite anode for significantly enhanced Li-ion storage

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

Spherical Li4Ti5O12/NiO Composite With Enhanced Capacity and Rate Performance as Anode Material for Lithium-Ion Batteries

Solvothermal synthesis of micro-/nanoscale Cu/Li 4 Ti 5 O 12 composites for high rate Li-ion batteries

Preparation and Electrochemical Performance of Li4Ti5O12/Co3O4 Composite as an Anode of Lithium-Ion Battery

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

Li4Ti5O12-based anode materials with low working potentials, high rate capabilities and high cyclability for high-power lithium-ion batteries: a synergistic effect of doping, incorporating a conductive phase and reducing the particle size

A simple synthesis of Li3Fe(MoO4)3@C composite anode materials with high initial Coulombic efficiency and high capacity stability for lithium ion batteries

Enhanced Electrochemical Performance of a Novel Li4Ti5O12 Composite As Anode Material for Lithium-Ion Battery in a Broad Voltage Window

Electrospun Li 4 Ti 5 O 12 /li 2 TiO 3 Composite Nanofibers for Enhanced High-Rate Lithium Ion Batteries

Simple Synthesis of TiNb6O17/C Composite Toward High-Rate Lithium Storage

Li2ZnTi3O8@α-Fe2O3 Composite Anode Material for Li-ion Batteries

Synthesis of nano-sized Li 4Ti 5O 12/C composite anode material with excellent high-rate performance

Synthesis and Electrochemical Performance of Nano TiO2(B)-coated Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Materials for Lithium-Ion Batteries

Electrochemical Performance of Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub>/TiO<sub>2</sub>/Li<sub>0.4</sub>TiO<sub>2</sub>/C Composite Prepared by the Electrospinning Method Using as Lithium Battery Anode Material

Li4Ti5O12/Reduced Graphene Oxide Composite As a High Rate Capability Material for Lithium Ion Batteries

High Performance Co3O4/Li2TiO3 Composite Hollow Nanofibers As Anode Material for Li-ion Batteries