Abstract:The most popular anode material in commercial Li-ion batteries is still graphite. However, its low intercalation potential is close to that of lithium, which results in the dendritic growth of lithium at its surface, and the formation of a passivation film that limits the rate capability and may result in safety hazards. High-performance anodes are thus needed. In this context, lithium titanite oxide (LTO) has attracted attention as this anode material has important advantages. Due to its higher lithium intercalation potential (1.55 V vs. Li+/Li), the dendritic deposition of lithium is avoided, and the safety is increased. In addition, LTO is a zero-strain material, as the volume change upon lithiation-delithiation is negligible, which increases the cycle life of the battery. Finally, the diffusion coefficient of Li+ in LTO (2 × 10−8 cm2 s−1) is larger than in graphite, which, added to the fact that the dendritic effect is avoided, increases importantly the rate capability. The LTO anode has two drawbacks. The energy density of the cells equipped with LTO anode is lower compared with the same cells with graphite anode, because the capacity of LTO is limited to 175 mAh g−1, and because of the higher redox potential. The main drawback, however, is the low electrical conductivity (10−13 S cm−1) and ionic conductivity (10−13–10−9 cm2 s−1). Different strategies have been used to address this drawback: nano-structuration of LTO to reduce the path of Li+ ions and electrons inside LTO, ion doping, and incorporation of conductive nanomaterials. The synthesis of LTO with the appropriate structure and the optimized doping and the synthesis of composites incorporating conductive materials is thus the key to achieving high-rate capability. That is why a variety of synthesis recipes have been published on the LTO-based anodes. The progress in the synthesis of LTO-based anodes in recent years is such that LTO is now considered a substitute for graphite in lithium-ion batteries for many applications, including electric cars and energy storage to solve intermittence problems of wind mills and photovoltaic plants. In this review, we examine the different techniques performed to fabricate LTO nanostructures. Details of the synthesis recipes and their relation to electrochemical performance are reported, allowing the extraction of the most powerful synthesis processes in relation to the recent experimental results.

Electrochemical performance of Li4Ti5O12 anode materials synthesized using a spray-drying method

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

Effective Oxygen‐Deficient Li4Ti5O12 Anode Material Displaying Excellent Rate Performance and Outstanding Cyclic Stability

Synthesis and Electrochemical Performance of Li4Ti5O12 Submicrospheres Coated with TiN As Anode Materials for Lithium-Ion Battery

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Investigation on process mechanism of a novel energy-saving synthesis for high performance Li4Ti5O12 anode material

High Performance Ti3+ Self-Doped Li4Ti5O12 Anode Materials Synthesized by an Electrochemical Method in Molten Salt

Synthesis and electrochemical performance of nanoporous Li4Ti5O12 anode material for lithium-ion batteries

Li4Ti5O12 Nanoparticles Prepared with Gel‐hydrothermal Process As a High Performance Anode Material for Li‐ion Batteries

Electrochemical and transport properties of Te-doped Li4Ti5O12 as anode material for lithium-ion half/full batteries

Elaborate strategy for preparing Li4Ti5O12-based anode materials with significantly improved lithium storage: TiO2 nanodots in-situ decoration and hierarchical structure construction

Superior Rate Performance of Li 4 Ti 5 O 12 /tio 2 /c/cnts Composites Via Microemulsion-Assisted Method As Anodes for Lithium Ion Battery

Li 1.4 Al 0.4 Ti 1.6 (PO 4 ) 3 -Modified Li 4 Ti 5 O 12 Anode for Lithium-Ion Storage with Enhanced Rate and Cycling Performance

High Performance of Pb-doped Li4Ti5O12 as an Anode Material for Lithium Ion Batteries

Fabrication of Li4Ti5O12 (LTO) as Anode Material for Li-Ion Batteries

Improved Electrochemical Properties of Li 4 Ti 5 O 12 Nanopowders (NPs) via Addition of LiAlO 2 and Li 6 SiON Polymer Electrolytes, Derived from Agricultural Waste

Ultra-high Specific Capacity of Cr3+-doped Li4Ti5O12 at 1.55 V As Anode Material for Lithium-Ion Batteries

Structure and electrochemical properties of Sm-doped Li4Ti5O12 as anode material for lithium-ion batteries

Enhanced Electrochemical Performance of Li4Ti5O12 Anode for Lithium Ion Batteries with Titanate Coupling Reagent As Electrolyte Additive

Synthesis of Li4Ti5O12 Nanostructural Anode Materials with High Charge–discharge Capability

Preparation and Electrochemical Performance of La3+ and F− Co-Doped Li4Ti5O12 Anode Material for Lithium-Ion Batteries