Abstract:The spinel lithium-ion battery anode material Li 4 Ti 5 O 12 (LTO) exhibits stable cycling and is less prone to lithium dendrite and solid electrolyte interphase (SEI) films. However, its theoretical capacity and conductivity are low within the electrochemical window of 1.0–3.0 V. In this study, we utilized active carbon (AC) coated and micron Silicon (Si) doped Li 4 Ti 5 O 12 , applying an extended electrochemical window of 0.01–3.0 V during cycling to enhance the material's electrochemical performance. Our investigation revealed that bare LTO sample as well as those with single Silicon doping or active carbon coating experienced rapid decay during high-rate long cycling tests. Conversely, the Silicon-carbon composite LSiAC sample (87 wt% Li 4 Ti 5 O 12 + 3 wt% AC + 10 wt% Si) demonstrated a capacity of 349.19 mAh g −1 (98.28%) at a 1C rate after 200 cycles, and achieved a capacity of 196.56 mAh g −1 (89.37%) after 1000 cycles at a 5C rate,; in comparison, bare LTO exhibited capacities of only 230 .98 mAh g −1 (1C-89.71%)and 145.63 mAh g −1 (5C-82.48%). This improvement can be attributed to three factors: first, the active carbon enhances material conductivity while the active carbon coating and SEI films simultaneously as a barrier isolating Li 4 Ti 5 O 12 from the electrolyte LiPF 6 , thereby preventing structural degradation; second, micron Si doping into Li 4 Ti 5 O 12 crystals introduces additional capacity and leads to an appropriate amount of expansion during cycling, effectively increasing crystal plane spacing and facilitating Li + migration. Final, the multi-layer core–shell structure consisting of Li 4 Ti 5 O 12 , active carbon coating, and SEI films acts as the buffer successfully limits the Si-Li 15 Si 4 phase transition volume expansion. The proposed modification process is straightforward and environmentally friendly, making it suitable for industrial-scale production. This approach holds promise in bolstering the competitiveness of spinel Li 4 Ti 5 O 12 as an anode material in the Lithium-ion battery market. Graphical

Ultra-high Specific Capacity of Cr3+-doped Li4Ti5O12 at 1.55 V As Anode Material for Lithium-Ion Batteries

Zr-doped Li4Ti5O12 Anode Materials with High Specific Capacity for Lithium-Ion Batteries

Heavily Cr3+-modified Li4Ti5O12: An advanced anode material for rechargeable lithium-ion batteries

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Preparation and Electrochemical Performance of La3+ and F− Co-Doped Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Electrochemical performance of Li4Ti5O12 anode materials synthesized using a spray-drying method

High Performance of Pb-doped Li4Ti5O12 as an Anode Material for Lithium Ion Batteries

Facile fabrication of Li5Cr7Ti6O25@Li0.33La0.56TiO3 composites as promising anode materials for high-performance Li-ion batteries

Structure and electrochemical properties of Sm-doped Li4Ti5O12 as anode material for lithium-ion batteries

High Rate Capability of Nd-Doped Li4Ti5O12 As an Effective Anode Material for Lithium-Ion Battery

The Synergistic Effect Supported Li 4 Ti 5 O 12 Anode with Advanced Lithium Storage Performance

Elaborate strategy for preparing Li4Ti5O12-based anode materials with significantly improved lithium storage: TiO2 nanodots in-situ decoration and hierarchical structure construction

Research Progress in Li4Ti5O12 As Anode Material for Li-ion Battery

High Performance Ti3+ Self-Doped Li4Ti5O12 Anode Materials Synthesized by an Electrochemical Method in Molten Salt

Freeze-drying synthesis of metal element (Zr, Cr, Co)–doped Li4Ti5O12 anode material for enhanced electrochemical energy storage in lithium-ion batteries

Structural and electrochemical properties of Gd-doped Li 4 Ti 5 O 12 as anode material with improved rate capability for lithium-ion batteries

Highly Crystalline Lithium Titanium Oxide Sheets Coated with Nitrogen-Doped Carbon Enable High-Rate Lithium-Ion Batteries.

Effect of Si Doping and Active Carbon Surface Modifications on the Structure and Electrical Performance of Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Electrochemical and transport properties of Te-doped Li4Ti5O12 as anode material for lithium-ion half/full batteries

Synthesis and Electrochemical Performance of Li4Ti5O12 Submicrospheres Coated with TiN As Anode Materials for Lithium-Ion Battery

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material