Abstract:Sm-doped Li4Ti5O12 (LTO) in the form of Li4-x/3Ti5-2x/3SmxO12 (x = 0, 0.01, 0.03, 0.05 and 0.10) is synthesized successfully by a simple solid-state reaction in air. XRD analysis and Rietveld refinement demonstrate that traces of the doped Sm3+ ions have successfully entered the lattice structure of the bulk LTO and the Sm doping does not change the spinel structure of LTO. However, of interest is that the lattice parameter increases gradually with the increase of the Sm doping amount, which is potentially beneficial for intercalation and de-intercalation of lithium ions. XPS results further identify the existence of Ti3+ ions and the transition of a small quantity of Ti ions from Ti4+ to Ti3+, which will improve the conductivity of LTO. All materials are well crystallized with a uniform and narrow size distribution in the range of 0.5-1.2 mu m. The results of electrochemical measurement reveal that the Sm doping can improve the rate capability and cycling stability of LTO. Among all samples, Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) exhibits the best electrochemical properties. The specific capacities of the Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) sample at charge and discharge rates of 5C and 10C are 131.1 mA h g(-1) and 119.2 mA h g(-1), respectively, compared with 64 mA h g(-1) (5C) and 47 mA h g(-1) (10C) for the pristine LTO in the potential range 1.0-2.5 V (vs. Li/Li+). This result can be attributed to Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) with a diffusion coefficient of 1.3 x 10(-12) cm(2) s(-1), which is higher than the 7.4 x 10(-14) cm(2) s(-1) for the LTO electrode without Sm doping. In the meantime, the discharge capacity of Li4-x/3Ti5-2x/3SmxO12 (x = 0.03) can still reach 125.1 mA h g(-1) even after 100 cycles and maintain 95.2% of its initial discharge capacity at 5C. Therefore, Sm doping has a great impact on discharge capacity, rate capability and cycling performance of LTO anode materials for lithium-ion batteries.

Freeze-drying synthesis of metal element (Zr, Cr, Co)–doped Li4Ti5O12 anode material for enhanced electrochemical energy storage in lithium-ion batteries

Zr-doped Li4Ti5O12 Anode Materials with High Specific Capacity for Lithium-Ion Batteries

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Preparation and Electrochemical Performance of La3+ and F− Co-Doped Li4Ti5O12 Anode Material for Lithium-Ion Batteries

Investigation on process mechanism of a novel energy-saving synthesis for high performance Li4Ti5O12 anode material

Unveiling the Synergic Roles of Mg/Zr Co-Doping on Rate Capability and Cycling Stability of Li4Ti5O12

Synthesis and assessment of the electrochemical performance of micro-nano-spherical Li4Ti5O12-LiAlO2 composites

Preparation and effects of F-doping on electrochemical properties of Li4Ti5O12 as anode material for Li-ion battery

Elaborate strategy for preparing Li4Ti5O12-based anode materials with significantly improved lithium storage: TiO2 nanodots in-situ decoration and hierarchical structure construction

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Structure and electrochemical properties of Sm-doped Li4Ti5O12 as anode material for lithium-ion batteries

Ultra-high Specific Capacity of Cr3+-doped Li4Ti5O12 at 1.55 V As Anode Material for Lithium-Ion Batteries

Li4Ti5O12 coated with ultrathin aluminum-doped zinc oxide films as an anode material for lithium-ion batteries

Facile fabrication of Li5Cr7Ti6O25@Li0.33La0.56TiO3 composites as promising anode materials for high-performance Li-ion batteries

Li4Ti5O12-based anode materials with low working potentials, high rate capabilities and high cyclability for high-power lithium-ion batteries: a synergistic effect of doping, incorporating a conductive phase and reducing the particle size

Enhancing Ultrafast Lithium Ion Storage of Li4Ti5O12 by Tailored TiC/C Core/Shell Skeleton Plus Nitrogen Doping

Carbon-coated Li4Ti5O12 optimized by fluorine regulation strategy for high-rate lithium-ion batteries with mixed diffusion and capacitive effects

Electrochemical and transport properties of Te-doped Li4Ti5O12 as anode material for lithium-ion half/full batteries

The Synergistic Effect Supported Li 4 Ti 5 O 12 Anode with Advanced Lithium Storage Performance

Tuning the Crystal and Electronic Structure of Li4Ti5O12 Via Mg/La Co-doping for Fast and Stable Lithium Storage

Ni and F co-modification to enhance the electrochemical properties of Li4Ti5O12 anode materials for lithium-ion batteries