Abstract:Li-rich layer-structured oxides are considered promising cathode materials for their specific capacities above 250 mAh·g–1. However, the drawbacks such as poor rate performance, fast capacity fading, and the continuous transition metal (TM) migration into the Li layer hinder their commercial applications. To address these issues, surface doping of Ti and Zr was conducted to the Li- and Mn-rich layered oxide (LMR), Li1.2Mn0.54Ni0.13Co0.13O2. The drop of the average discharge potentials of the Ti- and Zr-doped LMR was reduced by 593 and 346 mV in 100 cycles, respectively. With aberration-corrected scanning transmission electron microscopy and electron energy loss spectroscopy, we clarified that Ti4+ and Zr4+ ions are located near the surface of the material, anchor the surface oxygen, and stabilize the LMR structure. The difference in the strengths of the Ti–O and Zr–O bonds and the doping-resultant electronic structures were determined with density functional theory (DFT) calculations and soft X-ray absorption spectroscopy (SXAS), responsible for the electrochemical performance of surface-doped materials. These findings verify our modification strategies to enhance the cycling performances of the promising LMR cathode materials.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c00155.XRD patterns of LMR, LMR-Ti, and LMR-Zr; EELS profiles of LMR-Ti; EDS mapping; HAADF image of LMR-Zr; PDOS of Li2MnO3-Ti and Li2MnO3-Zr; COOP of Li2MnO3, Li2MnO3-Ti, and Li2MnO3-Zr; O K-edge SXAS; in situ DEMS signals; and formation energy of the TM ion substitution (PDF)This article has not yet been cited by other publications.

Zirconium(IV) Doping Enlarging Lithium-Ion Diffusion Channel of Lithium-Rich Li2.24SrTi6O14 Anode Material for High-Rate Lithium-Ion Batteries

Zirconium(IV) Doping Enlarging Lithium-Ion Diffusion Channel of Lithium-Rich Li 2.24 SrTi 6 O 14 Anode Material for High-Rate Lithium-Ion Batteries

Zr-doped Li4Ti5O12 Anode Materials with High Specific Capacity for Lithium-Ion Batteries

Zr-doping Stabilizes Spinel LiMn 2 O 4 As a Low Cost Long Cycle Life Cathode for Lithium Ion Batteries

Achieving High-Performance Li2ZnTi3O8 Anode for Advanced Li-ion Batteries by Molybdenum Doping

Improving the electrochemical properties of Al, Zr Co-doped Li4Ti5O12 as a lithium-ion battery anode material

Cl− Doping Strategy to Boost the Lithium Storage Performance of Lithium Titanium Phosphate

Sol-gel synthesis and electrochemical performance of Li 4-xMgxTi5-xZrxO12 anode material for lithium-ion batteries

Structure and Electrochemical Properties of Zn-Doped Li4ti5o12 As Anode Materials in Li-Ion Battery

Feasibility to Improve the Stability of Lithium-Rich Layered Oxides by Surface Doping

Recent Developments in the Doped-Li4Ti5O12 Anode Materials of Lithium-Ion Batteries for Improving the Rate Capability

Zn/Ti dual concentration-gradients surface doping to improve the stability and kinetics for Li-rich layered oxides cathode

Tuning the Crystal and Electronic Structure of Li4Ti5O12 Via Mg/La Co-doping for Fast and Stable Lithium Storage

Unveiling the Synergic Roles of Mg/Zr Co-Doping on Rate Capability and Cycling Stability of Li4Ti5O12

Boosting cell performance of LiNi0.8Co0.1Mn0.1O2 cathode material via structure design

Doping the Li4Ti5O12 lattice with extra-large anions

Towards a High-Rate and Long-Life LiVPO4F/C Cathode Material for Lithium Ion Batteries by Potassium and Zirconium Co-Doping

Modulating the Stoichiometry and Lithium Content to Boost the Electrochemical Performance of Li2ZnTi3O8 via High Valence Nb5+ Dopants

Li2TiSiO5: a low potential and large capacity Ti-based anode material for Li-ion batteries

Structural and Electrochemical Characteristics of Li4−xAlxTi5O12 As Anode Material for Lithium-Ion Batteries

Ca-doped Li4Ti5O12 Nanosphere As a Superior Anode Material for Lithium-ion Batteries