Abstract:Lithium–oxygen (Li–O2) batteries, renowned for their exceptionally high theoretical energy density, have garnered significant interest as a prime candidate for future electric device development. However, practical testing often yields unsatisfactory capacity due to the tendency of their solid‐phase discharge products to cover active sites on the electrode surface. Optimizing the growth mechanism of these solid‐phase products and addressing the storage issue to narrow the gap between actual and theoretical capacities stands as the core challenge in Li–O2 battery development. Here, a fluorine‐doped bimetallic cobalt‐nickel oxide (CoNiO2–xFx/CC) with an interlaced catalytic surface (ICS) and an open, corncob‐like structure is proposed as an oxygen electrode. Unlike conventional oxide electrodes with a "single adsorption catalytic mechanism", the ICS of the CoNiO2–xFx/CC electrode offers a compelling "competitive adsorption catalytic mechanism". This is attributed to the diverse selective sites within the ICS, where oxygen sites preferentially facilitate oxygen conversion due to their higher affinity for oxygen, while fluorine sites preferentially contribute to the growth of Li2O2 owing to their stronger affinity for LiO2. This transformation in the formation mechanism of Li2O2 and its morphology from film along the electrode surface to toroidal particles effectively mitigates the issue of buried active sites. Additionally, the unique structure of the CoNiO2–xFx/CC electrode aids in the storage and decomposition of Li2O2 products. Its corncob‐like open architecture not only promotes the capture and release of oxygen but also facilitates the formation of well‐contacted Li2O2/electrode interfaces, akin to a "corn on the cob" design. Consequently, the Li–O2 battery employing the CoNiO2–xFx/CC cathode demonstrates a high specific capacity of up to 30923 mAh g–1 and a lifespan exceeding 580 cycles, surpassing most reported metal oxide‐based cathodes. This work offers a promising solution to the issues of buried active sites and storage of insoluble products in metal‐air batteries. This article is protected by copyright. All rights reserved

Effect of TiC surface oxide overlayer on the control of Li O behavior in lithium-oxygen batteries: Implications for cathode catalyst design

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Effect of oxygen adsorbability on the control of Li2O2 growth in Li-O2 batteries: Implications for cathode catalyst design

Adsorption and Deposition of Li2o2 on the Pristine and Oxidized Tic Surface by First-Principles Calculation

High-voltage Performance of LiCoO2 Cathode Studied by Single Particle Microelectrodes –influence of Surface Modification with TiO2

Adsorption and Deposition of Li2O2 on TiC{111} Surface.

Polarized nucleation and efficient decomposition of Li2O2 for Ti2C MXene cathode catalyst under a mixed surface condition in lithium-oxygen batteries

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Functionalizing Titanium Disilicide Nanonets with Cobalt Oxide and Palladium for Stable Li Oxygen Battery Operations

Enhanced Cyclability of Li–O2 Batteries Based on TiO2 Supported Cathodes with No Carbon or Binder

Atomic-Thick TiO2(B) Nanosheets Decorated with Ultrafine Co3O4 Nanocrystals As a Highly Efficient Catalyst for Lithium-Oxygen Battery.

Theoretical Exploration of Single-Layer Tl2O As a Catalyst in Lithium–Oxygen Battery Cathodes

Understanding the role of TiO2 coating for stabilizing 4.6V high-voltage LiCoO2 cathode materials

Constructing An Interlaced Catalytic Surface Via Fluorine‐doped Bimetallic Oxides for Oxygen Electrode Processes in Li–O2 Batteries

Interface Crystal Domain Regulation Via TiO2 Surface Modification Enhancing Stability of Layered LiNi0.5Co0.2Mn0.3O2 for Lithium-Ion Batteries

Tailoring the Adsorption Behavior of Superoxide Intermediates on Nickel Carbide Enables High-Rate Li–O2 Batteries

Enhancing Catalytic Activity of Titanium Oxide in Lithium–Sulfur Batteries by Band Engineering

Mnco2o4 Decorated Magneli Phase Titanium Oxide As A Carbon-Free Cathode for Li-O-2 Batteries

New insight into the interface of TiO2/C as nanocomposite electrode for lithium-ion batteries

A new surface phase of Al2Ti7O15 to enhance the electronic conductivity and interfacial stability of LiCoO2 cathode materials

Enhanced Interfacial Kinetics and High-Voltage/High-Rate Performance of Licoo2 Cathode by Controlled Sputter-Coating with A Nanoscale Li4ti5o12 Ionic Conductor