Abstract:In this paper, a low-temperature (T=70degC) solution-phase approach has been developed for the fabrication of vertically-aligned ZnO nanoneedle arrays directly on bulk nickel substrate. The synthetic process involving no seeds, no catalysts, and no surfactants can be readily scaled up. The as-grown ZnO arrays are further used for the first time as anode materials for Li-ion batteries operated in the voltage window 0.05-2.5 V. In the preparation of battery electrode, there is no need to transfer the obtained ZnO arrays to a different surface or align them; in addition, no conducting carbon and other additives such as binder are employed. These offer significant advantages with respect to the cost and practicability. Galvanostatic cycling experiments show that our ZnO nanoneedle arrays exhibit considerably improved performance (especially the cycling stability) as compared to the powder of disordered nano needles. A first discharge capacity of 1219 mAh/g and a reversible discharge capacity of ~495 mAh/g after 10 cycles are observed (current rate: 200 mA/g). In contrast, ZnO film consisting of random nano needles has a smaller first discharge capacity (1090 mAh/g) and its reversible capacity fades rapidly even from the second cycle. The electrochemical performance of ZnO nanoneedle arrays can be further tuned by heat treatment of ZnO active materials at Ar atmosphere, which enhances the adhesion of ZnO to nickel substrate. Our results, combined with the fact that ZnO are cheap, easily prepared, and environmentally compatible, make the ZnO nanoneedle arrays a promising anode material for Li-ion batteries.

Atomic Layer Deposition of ZnO/TiO2 Nanolaminates As Ultra-Long Life Anode Material for Lithium-Ion Batteries

Atomic Layer Deposition of ZnO on Carbon Black As Nanostructured Anode Materials for High-Performance Lithium-Ion Batteries

In Situ Nafion-nanofilm Oriented (002) Zn Electrodeposition for Long-Term Zinc-Ion Batteries.

Nanoarray Architecture of Ultra-Lithiophilic Metal Nitrides for Stable Lithium Metal Anodes

An alumina stabilized ZnO-graphene anode for lithium ion batteries via atomic layer deposition.

Layered Double Hydroxide Nano- and Microstructures Grown Directly on Metal Substrates and Their Calcined Products for Application as Li-Ion Battery Electrodes

Ultrathin surface coating of conductive and zincophilic titanium oxynitride enables stable zinc anodes for aqueous zinc-ion batteries

Fabrication Of Zno@Tio2 Core-Shell Nanotube Arrays As Three-Dimensional Anode Material For Lithium Ion Batteries

Ultrathin ZnO Coating for Improved Electrochemical Performance of LiNi0.5Co0.2Mn0.3O2 Cathode Material

Pedot-Pss Coated Zno/C Hierarchical Porous Nanorods As Ultralong-Life Anode Material for Lithium Ion Batteries

Long Lifespan Lithium Metal Anodes Enabled by Al2O3 Sputter Coating

Rational design of 3D N-doped carbon nanosheet framework encapsulated ultrafine ZnO nanocrystals as superior performance anode materials in lithium ion batteries

Advancing Anode-Less Lithium Metal Batteries: ZnF2 Modification and In-Situ Structural Regulation for Enhanced Performance

ZnO Nanoneedle Arrays Directly Grown on Bulk Nickel Substrate for Li Ion Battery Electrodes with Improved Performance

Atomic layer deposition-strengthened lithiophilicity of ultrathin TiO2 film decorated Cu foil for stable lithium metal anode

Atomic layer deposition assisted superassembly of ultrathin ZnO layer decorated hierarchical Cu foam for stable lithium metal anode

Improving high-temperature performance of lithium-rich cathode by roll-to-roll atomic layer deposition of titania nanocoating for lithium-ion batteries

Long-term stable Li metal anode enabled by strengthened and protected lithiophilic LiZn alloys

Ultrathin ZrO2 coating layer regulates Zn deposition and raises long-life performance of aqueous Zn batteries

Titanicone-derived TiO2 Quantum Dot@carbon Encapsulated ZnO Nanorod Anodes for Stable Lithium Storage.

ZrO2 Thin Film Protected Li Metal Anode for Improved Electrochemical Performance