Abstract:Uncontrollable dendrite growth during the repeated plating/stripping of Li ions induces short cycle life and safety issues, which has severely impeded the practical application of lithium metal battery. It is acknowledged that the solid electrolyte interphase (SEI) is pivotal for Li metal anode stabilization. Here, a lithium metal anode coated with an artificial SEI film as the working electrode is applied. The TiO2 coating layer is firstly demonstrated for the lithium metal anode protection via atomic layer deposition (ALD) method. Thanks to the ultrathin TiO2 layer, dendritic growth is suppressed and the cycling lifetime is significantly improved. Additionally, the thickness of TiO2 protective layer has been further optimized. Comparing with other different thickness TiO2 layer, 5 nm TiO2 layer is found to be the optimized parameter toward capacity, cycling stability and rate capability in both symmetric battery system and full-cell system. The TiO2 layer promoted uniform deposition of Li+ and effectively inhibited the growth of lithium dendrites. Symmetric Li/50TiO2||Li/50TiO2 battery could cycle stably for more than 1600 h at 1 mA cm−2, and more than 500 h at 3 mA cm−2 and 10 mA cm−2 current density. The Li/50TiO2||NCM622 full-cell exhibited better rate performance and long-cycle performance, which capacity retention was increased by 23.3% compared to bare electrode after 100 cycles at 0.5 C charge-discharge current density. Furthermore, the inherent working mechanism of TiO2 artificial SEI film has been proposed. This work provides an effective and new alternative method for lithium metal anodes protection, which is critical for the future design of next-generation Li metal batteries under safe operation.

Atomic layer deposition-strengthened lithiophilicity of ultrathin TiO2 film decorated Cu foil for stable lithium metal anode

Self-Adaptive and Electric Field-Driven Protective Layer with Anchored Lithium Deposition Enable Stable Lithium Metal Anode

Li metal coated with Li3PO4 film via atomic layer deposition as battery anode

Constructing ultrathin TiO2 protection layers via atomic layer deposition for stable lithium metal anode cycling

Lithiophilic Ti 3 C 2 T x -Modified Cu Foam by Electrophoretic Deposition for Dendrite-Free Lithium Metal Anodes

Vertically Aligned Lithiophilic CuO Nanosheets on a Cu Collector to Stabilize Lithium Deposition for Lithium Metal Batteries

Lithium Electrodeposited on Lithiophilic LTO/Ti3C2 Substrate As a Dendrite-Free Lithium Metal Anode

TiO2/Cu2O Heterostructure Enabling Selective and Uniform Lithium Deposition Towards Stable Lithium Metal Anodes

Uniform titanium nitride decorated Cu foams by electrophoretic deposition for stable lithium metal anodes

LiCoO 2 Ultrathin Layer for Uniform Lithium Deposition toward a Highly Stable Lithium Metal Anode

Ultrathin Two-Dimensional Atomic Crystals As Stable Interfacial Layer for Improvement of Lithium Metal Anode

Lithiophilic Cu3Sn Modified Cu Foil as Current Collector for Stable Lithium Metal Anodes

Atomic layer deposition assisted superassembly of ultrathin ZnO layer decorated hierarchical Cu foam for stable lithium metal anode

Li4Ti5O12 Coating on Copper Foil As Ion Redistributor Layer for Stable Lithium Metal Anode

Surface lithiophilicity modification with triazole to realize dendrite-free lithium metal anode

Achieving homogeneous Li deposition of 3D dendrite-free lithium metal anode through atomic layer deposition surface modification

Self-standing TiC-modified Carbon Fibre Electrodes Derived from Cellulose and Their Use as an Ultrahigh Efficiency Lithium Metal Anode

Atomic layer deposition of TiO 2 on negative electrode for lithium ion batteries

TiO2 nanotubular arrays decorated with ultrafine Ag nanoseeds enabling a stable and dendrite-free lithium metal anode

The chemically deposited Sn combines with the TiO2 3D reticular structure to form a stable and uniform lithium metal anode

Endowing Cu Foil Self-Wettable in Molten Lithium: A Roll-to-Roll Wet Coating Strategy to Fabricate High-Performance Ultrathin Lithium Metal Anodes