Field Emission Characteristics of LaB_6 Film
朱炳金,陈泽祥,张强,王小菊,于涛
2008-01-01
Chinese Journal of Luminescence
Abstract:Vacuum micro-electronics devices based on field emission cathode have become the focus of people around the world because it has lots of advantages such as high-speed electron transmission, low power consumption, high current density, operating without heating and so on. Field emission array (FEA) is the most important part of the vacuum micro-electronics device. In order to improve the performance of the FEA devices, many new structures have been designed and the fabrication of FEA has been optimized constantly. Filmed-array is a novel approach that includes not only the advantages of the array but also the characters of the film materials. It is considered to be an effective method to improve the performance of the devices. Filmed-array is fabricated by coating additional thin films on the tip of prepared spindt arrays. If the film material chosen has low work function, high conductance and reliability, good emission can be gained. The choosing principle of the film materials includes work function, conductance, density and reliability. Being a good thermal emission material, lanthanum hexaboride(LaB6) has excellent characteristics and is propitious to the film. The fabrication of LaB6-coated silicon spindt field emission arrays is reported in this paper, in which standard semiconductor techniques including oxidation, photolithogragh, dry etching, oxidation sharpening on the n-type silicon were used. In our fabricated silicon spindt arrays, the height is about 1μm. Interval between each silicon spindt is 6 μm, and cutting-edge radius of curvature is about 50 nm, tip-angle is about 56 degrees, the density of arrays is about 106 /cm2. Then, the LaB6 film is deposited on the silicon spindt by electron beam evaporation to reduce the work function and enhance the capability of resisting ion bombardment. Film thickness is about 50 nm, the radius of curvature is about 111 nm.The X-ray Diffraction (XRD) analysis results indicates LaB6 with well crystallization was gained by electron beam evaporation, In interplanar 〈100〉, films make preferred growth. I-V characteristics and stability of field emission of silicon array and LaB6 filmed-arrays have been studied. The results show that silicon array coated by LaB6 film has good and stable emission characteristics. The total field emission current from the LaB6 filmed-arrays reached to 125 μA, which is 125 times than pure silicon spindt arrays. The results indicated LaB6 filmed-arrays is the kind of ideal field emission arrays.