Abstract:This paper investigates the behavior of transverse defects under significant total strain in conditions of complex vortex metal flow implemented through the radial shear rolling (RSR) method. The aim of this study is to assess the applicability of RSR processing for the in-depth transformation of small ingots of special steel into bars, particularly for the manufacturing of structural elements in specialized construction projects such as nuclear power plants. Although a substantial total strain is anticipated to enhance the steel structure and contribute to defect closure, the question of the development or closure of potential casting defects remains unclear. To address this issue, model tests were conducted to simulate the implementation of RSR processing. Defect behavior data under very complex vortex metal flow and high strain conditions were obtained for the first time and have scientific merit. A small steel ingot with a 32 mm diameter, containing a simulated artificial defect in the form of a transverse through-hole with a 5 mm diameter, was employed. During rolling, the workpiece diameter was progressively reduced by 2 mm with each subsequent pass, reaching a final diameter of 20 mm. Additionally, to provide a more detailed visualization of the defect evolution process, the same defect was modeled in an aluminum bar over six passes, and changes in defect volume and shape were analyzed after each pass. A highly detailed 3D visualization of the actual defect evolution was achieved based on cross-sections from experimental workpieces. These data corresponded to the total strain levels obtained by finite element method (FEM) simulation. Notably, a consistent similarity was observed between the test results for both metals, revealing a reduction in defect volume of up to 67.7%. The deformational welding of defects in the outer sections, encompassing one-third of the rod’s radius, occurred in the initial passes. However, defects in the axial zone of the rods remained unclosed, lengthening and gradually decreasing proportionally to the elongation of the rod, akin to conventional rolling. Consequently, the radial shear rolling (RSR) method is unsuitable for ingots with substantial discontinuities in the axial zone post-casting. Nevertheless, the method ensures the total welding of defects located in the outer zones of the ingots, even with minor applied deformations and a slight decrease in the diameter of the deformed ingot. Such data were obtained for the first time and should contribute to future investigations in this field.

Formation Mechanism and Main Control Methods of Bright‐Band Defects in Strip Casting Based on Numerical Simulation

Melt flow, solidification structures, and defects in 316 L steel strips produced by vertical centrifugal casting

Research on the formation mechanism and fracture behavior of bifilm defects

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Characteristics of Defect Bands and Their Formation Mechanisms in A356 Wheel Fabricated by Horizontal Squeeze Casting

Numerical simulation of shrinkage porosity defect in billet continuous casting

Thermomechanical Analysis and Optimisation for Beam Blank Continuous Casting

Coupling Simulation and Mechanism Analysis of Grain Formation and Growth in Horizontal Centrifugal Casting

Solidification Behaviour and Viscoplastic Deformation in the Strip Casting Process by Twin Roll Method.

Formation mechanism and control of a kind of pit-shaped defect in Cf53 rolled products

Homogenization Path Based on 250 mm × 280 mm Bloom under Mixed Light and Heavy Presses: Simulation and Industrial Studies

Analysis of Longitudinal Cracking and Mold Flux Optimization in High-Speed Continuous Casting of Hyper-Peritectic Steel Thin Slabs

Modeling the Evolution of Casting Defect Closure in Ingots through Radial Shear Rolling Processing

Microstructure of Aluminum Twin-Roll Casting Based on Cellular Automation

Advance in Research of Casting Defects of Directionally Solidified Nickel-based Single Superalloys

A review of research on central crack in continuous casting strand

Experimental and simulation study for rewelding defects during the flow process of Semi-solid die casting

Numerical Simulation of Transport Phenomena During Strip Casting with EMBr in a Single Belt Caster

Effect of centrifugal casting process on mold filling and grain structure of K418B turbine guide

Twin roll casting of copper alloy C19210 using commercial scale machine

Analysis on Micro Cracks Defect of Francis Turbine Band Casting Based on Solidification Process Simulation