Abstract:The aim of this study was to simulate the solidification process of beam blank continuous casting, and then find the reasons for the typical defects of the beam blank. A two-dimensional transient coupled finite element model has been developed to compute the temperature and stress profile in beam blank continuous casting. The enthalpy method was used in the heat conduction equation. The thermo-mechanical property in the mushy zone was taken into consideration in this calculation. It is shown that at the mold exit the thickness of the shell had its maximum value at the flange tip and its minimum value at the fillet. The temperature had a great fluctuation on the surface of the beam blank in the secondary cooling zone. At the unbending point, the surface temperature of the web was in the brittleness temperature range under the present condition. To ensure the quality, it is necessary to weaken the intensity of secondary cooling. At the mold exit the equivalent stress and strain have higher values at the flange tip and at the web. From the spray 1 to the unbending point, the maximum values of stress and strain gradually moved to the internal section of the flange tip and the web. However, whenever, there were bigger stress and strain values near the flange tip and the web than in the other parts, it must be very easy to generate cracks at those positions. Now, online verification of this simulation has been developed, which has proved to be very useful and efficient to instruct the practical production of beam blank continuous casting.

Solidification Behaviour and Viscoplastic Deformation in the Strip Casting Process by Twin Roll Method.

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

An Experimental and Numerical Study on the Modelling of Fluid Flow, Heat Transfer and Solidification in a Copper Continuous Strip Casting Process

Thermomechanical Modeling of Solidification Process of Squeeze Casting Ii. Numerical Simulation and Experimental Validation

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Application of phase field model coupled with convective effects in binary alloy directional solidification and roll casting processes

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Mathematical modelling of fluid flow, heat transfer and solidification in a strip continuous casting process

Thermomechanical Modeling of Solidification Process of Squeeze Casting I. Mathematic Model and Solution Methodology

Coupled thermal-fluid-mechanics analysis of twin roll casting of A7075 aluminum alloy

Numerical Simulation of Solidification Process in an SCR Wheel and Belt Continuous Caster

Coupled Analysis of Temperature and Flow During Twin-Roll Casting of Magnesium Alloy Strip

Twin-Roll Casting of Aluminum-Steel Clad Strips: Static and Dynamic Mechanical Properties of the Composite

Thermal Stress Analysis of the Solidification Process of Francis Turbine Band Casting

A Thermomechanical Finite Element Model for Simulating the Solidification Process of Squeeze Casting

Investigation of Solidification Heat Transfer in Slab Continuous Casting Process Based on Different Roll Contact Calculation Methods

Numerical Simulation of the Solidification Process of a Heavy Roll Stand for Temperature Field and Thermal Stress Field

Direct Numerical Simulation of Solid Deformation During Dendritic Solidification

Hot Deformation Behavior of Free-Al 2.43 wt.% Si Electrical Steel Strip Produced by Twin-Roll Strip Casting and Its Effect on Microstructure and Texture

Thermomechanical–microstructural modelling of nodular cast iron solidification

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating