Abstract:In order to understand the thermal and mechanical behavior during solidification of the strand in the slab casting mould, a two-dimensional coupled thermo-mechanical finite element model was built and the corresponding FEM program was developed. The model simulates a quarter of the transverse section of the strand as it moves down in the mould at the casting speed. The heat transfer in the mould and the strand is analyzed with the steady model and the transient model, respectively. A thermo-elastoplastic plane stress model is used for analyzing the strand deformation. The heat transfer and the deformation are coupled through the interfacial thermal resistance between the strand and the mould. The model was used to investigate the effects of mould corner configuration and mould taper on the crack formation tendency of strand. The results show that employing a chamfered mould with proper corner size could modify the 2D heat transfer conditions at slab corners, hence reducing the risk of transverse corner cracks. Likewise, employing an optimized parabolic mould taper could remarkably achieve better uniformity of the strand temperature and stress, and simultaneously reduce the peak value of the stress, thus resulting in less crack occurrence, which favorably coincides with the theoretical expectation. The successful application of the coupled thermo-mechanical model demonstrates its tremendous potentialities for further understanding of the internal crack formation and for the optimization of operation parameters and the mould configuration.

Thermomechanical Modeling of Solidification Process of Squeeze Casting I. Mathematic Model and Solution Methodology

A Thermomechanical Finite Element Model for Simulating the Solidification Process of Squeeze Casting

Thermomechanical Modeling of Solidification Process of Squeeze Casting Ii. Numerical Simulation and Experimental Validation

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

A Mathematical Model for Simulating the Microporosity of Squeeze Casting of Aluminum Alloy

A Study on the Numerical Simulation of Thermal Stress During the Solidification of Shaped Castings

Microstructure simulation in pressurized solidification during squeeze casting of aluminum alloy A356

AN ELASTIC-VISCOPLASTIC CONSTITUTIVE MODEL FOR SQUEEZE CASTING ALUMINUM ALLOY

Cfd-Based Multicomponent Model for Solidification of Casting Process

Application of Modeling and Simulation of Thermal Stress in Solidification Process of a Heavy Steel Casting

The Challenge and Progress in Macro- and Micro-modeling and Simulation of Squeeze Casting Process

Mathematical Model of Fluid Flow and Solidification in Mold Region of Continuous Slab Casting

A quantitative model for describing crystal nucleation in pressurized solidification during squeeze casting

Thermal stress simulation considering mechanical interaction between casting and mold

An Improved Mathematical Model to Simulate Mold Filling Process in High Pressure Die Casting Using CLSVOF Method and CSF Model

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

Solidification modeling in continuous casting by finite point method

Numerical Simulation of the Thermo-Mechanical Process for Beam Blank Continuous Casting

Thermo-mechanical Modeling in Continuous Slab Casting Mould and Its Application