Abstract:Taking horizontal twin-roll casting mill as the research object, the geometric modeling and gridding of the rolling mill are completed by using the design modeler and gridding module of ANSYS Wrkbench platform. Combined with Fluent fluid simulation module, a two-dimensional steady-state laminar flow coupled model of copper-aluminium clad plate cast-rolling process was established. Through the analysis of range data obtained by orthogonal simulation design method, the order of importance of each factor is as follows: billet speed, cast-rolling zone length, preheating temperature of copper strip, pouring temperature. Through the analysis of factors and indicators (liquid hole depth ratio), the suitable technological parameters range are 0.3~0.6 m.min-1 for billet speed, 933~993 K for pouring temperature, 300~431 K for preheating temperature of copper strip, 57~80 mm for cast-rolling zone length. In order to verify the reliability of numerical simulation method and result analysis, the casting-rolling test was carried out with simulated process parameters. The exit temperature was measured by thermocouple. The results show that the error between simulation results and measured results is small, which verifies the accuracy of simulation and the feasibility of guiding production. When the billet speed is 0.5 m/min, the pouring temperature is 963 K, the length of casting-rolling zone is 70 mm and the copper strip is not preheated, the 10 mm thick copper-aluminium composite plate has better shape. The tensile properties show that the composite plate has both the high plasticity of aluminium and the high strength of copper.

Coupled thermal-fluid-mechanics analysis of twin roll casting of A7075 aluminum alloy

Coupled Analysis of Temperature and Flow During Twin-Roll Casting of Magnesium Alloy Strip

Numerical Simulation of Cast-rolling Process for Copper-Aluminum Composite Plate

Prediction on the solidification behavior of AA6005 aluminum alloys produced by inclined twin-roll casting: A finite element analysis

Metallurgical Method of Determining Heat Transfer Coefficient in Simulations of Twin-Roll Casting

Numerical simulation on flow and heat transfer in twin roll strip casting and rolling molten pool with side dams vibrating

Numerical Simulation of Copper-Aluminum Composite Plate Casting and Rolling Process and Composite Mechanism

Simulation of microstructures in solidification of aluminum twin-roll casting based on CA

Analytic Numerical Modeling for Thermal Mechanical Processing of Plate under Rolling

Numerical Simulation of Molten Pool and Control Strategy of Kiss Point in a Twin-Roll Strip Casting Process

Microstructure of Aluminum Twin-Roll Casting Based on Cellular Automation

Numerical Simulation and Experimental Investigation of Microstructure Evolution and Flow Behavior in the Rheological Squeeze Casting Process of A356 Alloy

An Effective Thermal-Mechanical Coupling Method for Simulating Friction Stir-Assisted Incremental Aluminum Alloy Sheet Forming

A symplectic analytical approach for thermal-metallurgical coupling problems: A case study of hot-rolled coil cooling

Numerical Simulation of the Roll Forming Process of Aluminum Folded Micro-channel Tube

Simulation of Heat Transfer Behavior of Shaped Interface in Aluminum Cast-Rolling Process

Numerical investigation on thermo-mechanical and material flow characteristics in friction stir welding for aluminum profile joint

An Integrated Approach to Study the Hot Tearing Behavior by Coupling the Microscale Phase Field Model and Macroscale Casting Simulations

Model experiments for the determination of the heat-transfer coefficient and transition thermal analysis in the direct rolling process

Accurate Simulation of Complex Temperature Field in Counter-Pressure Casting Process Using A356 Aluminum Alloy

Numerical Analysis of Semi-Solid Die-Casting Automobile Part Based on the Thermo-Visco-Plastic Constitutive Relation